This velocity model of his own design, is designed to perform a figure of course. The model can be made in the traditional method where the frames are assembled with plywood with thickness of 1 mm, a keel from a piece of wood a cross section of 6X10 mm, the stem is made of plywood of 3 mm thickness, stringers — strips of a cross section of 4×4 mm. the Hull is sheathed with millimeter plywood; experienced modelers make it from fiberglass, pre-prepared matrix. To strengthen the hull glued the keel bar, and extra stringers and a bulkhead separating the engine compartment from the compartment with the radio.THE MODEL CLASS F-W-E
This velocity model of his own design, is designed to perform a figure of course. The model can be made in the traditional method where the frames are assembled with plywood with thickness of 1 mm, a keel from a piece of wood a cross section of 6X10 mm, the stem is made of plywood of 3 mm thickness, stringers — strips of a cross section of 4×4 mm. the Hull is sheathed with millimeter plywood; experienced modelers make it from fiberglass, pre-prepared matrix. To strengthen the hull glued the keel bar, and extra stringers and a bulkhead separating the engine compartment from the compartment with the radio.
This tractor for almost 20 years, and all these years he not only regularly serves his Creator A. A. Safenano from the village of Alexandrov, the Tambov region, but also constantly improving. A feature of the car is a bucket-loader which is quite rare among self-made designs. This device is good because it optionally can be used as a blade, for example, when clearing snow from roads.
Want to offer readers to build an electric scooter. However, this is only an idea, without detailed development. This electrosolar can be made at home, using the components of industrial scooters. Bearing parts can be made of pipe of suitable diameter.
In most circles of technical simulation in our country now, unfortunately, no funds to purchase even the basic necessities, not to mention the purchase of kits for making teaching AIDS and models. Have to adapt, focusing on the use of industrial and domestic waste. But if a relatively simple design can still be built from “junk” materials, equipment remote control much more difficult.
Tourists, fishermen, hunters and fans of water recreation dream to have a comfortable, not heavy, transportable boat. For this purpose, in my opinion, the most suitable rubber inflatable boat.
A train consisting of a locomotive with a tender car, napep-ing tanks and trucks built in the circle of railway modelling road station of young technicians of the North-Caucasian railway. Did his younger students under the guidance of V. M. lositsky..
Electrofresh is intended for soil (top soil) household and cottage (with electricity) sites, hilling potatoes. Considering the rather difficult conditions: long continuous work, continuous overload, dust, preference was given to more severe and large industrial three-phase motor is totally enclosed, front manifold, DC.
The creation of RC model aircraft preceded, as a rule, the search of the prototype aircraft, because aviation hobby in the first place, is a small picture of the real aircraft. As for the “Finist”, selected as a sample when designing a radio-controlled model, he seemed to be specially created by the designer as a future prototype flying polyopia. In favor of this choice — and the wing of large aspect ratio, and developed a stabilizer, and a rather large keel, and a voluminous fuselage, makes it easy to install control equipment model.
