The proposed instrument is an improved version of the previously published article “the Indicator of the electric field” [1].
Transceiver SV MJ-2701 company MegaJet is designed for a supply voltage of 12.5 V, which, despite its “special” purpose to work as an automotive MW transceiver with power from the onboard network of the car 12, is not reasonable from the practical point of view and logic. As is well known to experienced Amateurs and professionals, the voltage of the car (meaning a car with a battery voltage of 12 VDC) when the engine is running can reach 15 In (these are the parameters of the relay controller charging battery). Consequently, some electronic and radio system (including transceivers) when operating in the vehicle fail.
The fixture is designed without a preliminary marking to make notches in the hubs of the propeller blades.
Every year increases the number of syt and Palaces of pioneers, where the pipeline automodelismo. During the construction of trails is often necessary to perform smooth transitions from concentric circles to parallel straight, which causes some difficulties. At the station of young technicians of the Leningrad district of the city of Yerevan was built trendoriginal track. Today we decided to share our experience of graphical representation of the curves of the track.
In the journal “modelist-Konstruktor” No. 3 for 2006 C. A. Kotov shared with the readers the experience in the manufacture in a home workshop metal using scrap materials, in particular, one of his options was made on the basis of the hockey stick. Developing this theme, the author offers a new development.
To build templates of the screw (side view) for a given shape of the blade (top view) and the step there are two main methods of calculation: analytical and graphical. Usually based on the following characteristics: diameter, the relative width of the blade and step. Since the amount of slip is difficult to consider in advance, based on the geometric pitch.
Athletes, acting in competition with rezinomotornaya models it is well known the importance of precise trouble-free operation of the stopping device of the nasal boss. Therefore, the appearance of any new construction is of great interest to modelers.
Sealed alkaline nucleotidase (NiCd) and Nickel-metallgidridnye (NiMH) batteries are finding increasing application not only in industrial devices but also in home appliances, replacing batteries size AA and AAA. But these batteries, like any other, eventually “emptied” and require charging. To recharge, as recommended by the instructions for use and marking of the batteries themselves, through them must pass through the current ICT = 0.1 mA from the numerical value of the nominal capacity C for 12 — 16 hours.
That a few liters of water enough to obtain a flame of high temperature (200° C), make sure everyone, read the description of the device developed by me to the cell.
Starting a towing device (Fig. 1) easy to produce in any model circle. In the absence of a lathe it can be made flat, which, however, some will increase size, but will not affect performance.
