Motorcycle owners know how difficult it is to operate the motor at low speeds — for example, when the motorcycle moves along a dirt bumpy road. Without blowing counter-flow cylinders overheat, the engine loses power, wears out faster… I’m getting out of this situation, using forced cooling. On his “Ural” installed two small fan in Read more…
One who often works with paper and ink, it is recommended to do simple drawing tool simplifies many design works. In principle, it is a cross between a poster with pen and brush. To make it, you need to whittle out wooden planks a simple holder, made of tin to cut two plates and to Read more…
To prevent access by children to “adult” or colecciones books stored in a shelf with sdvizhnye glasses will help ordinary furniture lock with retractable tongue and bent from steel strip. The thickness of the strips is determined by the gap between the panes.
That the cord does not interfere with the movement of the sled during the descent from the mountain, I propose to make it retractable. For this to end you need to tie the two segments of elastics and pin them at the back of the sled. The knots will serve as the limiters of pulling Read more…
How to be if urgently need to carry out drafting work using ink, a special ruler with a raised above the paper edge among the tools was not there! A way out of this situation is shown in figure — two or three paper clips fixed to the usual square or line, thereby eliminating the Read more…
Sometimes when working on a ladder is required to extend, trim some detail, and to use the necessary tools. Great convenience will create a removable stopni-workbench, which is easy to do several rods and a piece of plywood or chipboard.
To increase several times the volume of the wardrobe and save in the proper form of things you can if you use a metal chain with large links and hang the hangers with the clothes as shown in the figure.
Flooring will be much neater and better if, instead of the traditional wedges to use an ordinary car Jack. Under the support leg of the Jack placed bars of appropriate dimensions. N. SVIRIDENKO. p. Pervomayskiy, Kazakhstan
One time I urgently needed to draw a charge, and at hand, no needle to scratch or ruling pen, although the lacquer was. Then decided to fill them inscribed with the rod of a ballpoint pen. Rinsed it, squeezed out of the wire ball filled (though with difficulty) varnish – track was surprisingly smooth. Further Read more…
Not to look for the switch in the dark, to make it a backlit “Neonka” from the starter of the fluorescent lights and the resistor 100 ohms, connected in series— that’s the whole scheme. It remains only to place it in the body of the switch and drill a small hole when the key is Read more…
