Advice

To control the timely switch off the light in podsol tion spaces (storerooms, bathrooms n toilet komnatah) on the status of the switch is very inconvenient. For this purpose in my apartment for several years regularly is the simplest indicator. Its manufacture consists in the insertion of the rod of Plexiglas with a diameter of Read more…

The Naka Housewives raise a hand to throw out the Sprouted onion it’s Often parked in the first one pot and a week on your table fresh Herbs here is a “garden” looks very much untidy is Not an example of decent looks “bed made out of egg boxes Box that has a dozen holes Read more…

The valve switches the water installed in the bathrooms and on the kitchen sink, often fail and the cause is the deformation of the rubber cuff, which slides with Kalpana when trying to switch of water pressure.   Suggest to replace it with an improvised plastic ring representing part of the tube from penaltie from Read more…

The usual children’s sledge with backrest it is possible to carry only rounded chastyami runners forward. However, it is often necessary to transport the child back forward — then his face protected from the wind. A small alteration and it will be possible to implement at any time. You just need to add sacropenia in Read more…

Do you know. the drill bit in cutting the hole in the glass can be done in just half an hour. It will be based on the movie glass cutter fixed in the slot on the end of the steel rod. Its diameter should be slightly smaller than the diameter of the roller. The roller Read more…

  Often, in practice, the home worker is required to prepare to use just a few drops of epoxy. In this case should not communicate with big tanks, much better for this purpose, suitable old aluminum spoon, the handle end which is curved as shown in the figure.  

Aerator for bath to build not so simple: it is necessary to drill the tub, equipped with holes check valves, etc., I came easily — assembled rectangular frame of duralumin pipes from the cot, connecting them with lengths of plastic hose. The flow of air through the tee, welded using a soldering iron from the Read more…

Means and ways to curb the creaking doors invented a lot, but almost all of them require regular renewal of any grease. Meanwhile, there is a kind of “lubricant” that will work practically forever. Enough to cut out any plastic (PVC, thick polyethylene, polytetrafluoroethylene, etc.], two washers, the inner hole to match the diameter of Read more…