Advice

To score a long thin nail, and especially copper or brass (e.g., with mounting frames) is always a problem. Will help you in this case, the conventional pliers or a wooden clothespin.

To withstand the strictly perpendicular direction when drilling holes in the wall or to any vertical surface— just attach to a drill with tape or duct tape carpenter’s level. His shifty air bubble in a glass tube, show that you have not rejected the tool from the horizontal.

Produced digital multimeters (like many other devices) have on the arrow switch in color that almost merges with the body. Arrow will be more visible, if you paint with white enamel or stick to it with glue “Moment” the same size arrow out of paper or thin white plastic.

When installing the propeller on the crankshaft of the engine of the snowmobile of space to accommodate the exhaust pipes and mufflers. And without the exhaust system of a two-stroke engine is not only more noise, but also consumes more fuel. However, its substitute a simple engine-IZH can serve steel cups Ø 45 mm and Read more…

No, the Council is not for Amateurs. Although for them, too, because everybody who is going on the road, among other things, I’ll try not to forget the needle and thread may come in handy. For this there are excellent road of the spool and the needle is where to invest, and thread spooling. If Read more…

As you know, the characters I. Ilf and E. Petrov in search of jewels destroyed twelve beautiful chairs. It is unlikely it would have required them provide master Gambs under seat drawer — pull-out or door. This is what I am and contrived in their chairs — however, for storage of jewelry, and tools. Most Read more…

If you want to transfer a set of tools to the job site or just keep them at the ready is essential for this will be an easy plastic tray. These are found in hardware stores, but can be manufactured with your own hands: for example, of halved plastic canisters. The tray will be even Read more…

When finished, do not rush to sweep away the iron filings: putting them on paper with the help of the charge from the back of the magnet and adding rosin, it is possible to make flux for soldering pencil. It is particularly effective when the tinning of aluminum. Pour the molten rosin with the addition Read more…

Cutters and pliers — all that is needed for transformation of safety pins into miniature spring lock. It can be used for quick connection of ropes, stretch marks, and for other purposes. Moreover, in contrast to the carabiner pin is guaranteed against accidental disclosure.

Than a good hand drill is convenient to operate in tight spaces. But needed a drill of a different size or required stronger tightening Chuck, and have to return to the tool shelf… isn’t it better to fix any of the drills and the key to the Chuck directly into drill? To do this, from Read more…