There are many simple homemade designs boat, but mine is probably among the most simple. To make it was not difficult: me and my friend Sasha Silantyev took this for two days. And the work was as follows. First of all, with the usual clamshell removed the tarp and springs, and also, cut the rivets, the arc of the headrest. For the longitudinal framing members used a tube from another old clamshell. To blend with a transverse pipe of the framework we came up with, we think, quite an interesting way. After cutting at the end of each longitudinal pipe is made semi-circular notch. At the point of joining on the transverse elements wound through three or four layers of textile adhesive tape and placing the longitudinal pipe, pulled the frame to a steel cable.SO AS NOT TO SUFFER HANDS
To work with vibrating hand tools or tool is good to have a “antifibrogenic”. To manufacture them is not difficult. Enough to the palms of the usual gloves to sew the strip or plate of porous rubber. A. MATVEICHUK, 3аводоуковск, Tyumen region.










