Advice

be easily treated with sandpaper, if you use this wooden rod of suitable diameter. The operation is performed through wrapped around it a piece of sandpaper required granularity.

To make the tension spring is easy: a tight navit wire round rod — coil to a coil. However, a spring working in compression, this technology is not suitable: between its coils must be a certain distance. In this case, help out a bolt of the correct size. Stacking wire into the threaded groove, we Read more…

The electric shavers mesh head a lot of supporters who prefer their options with rotating knives. However, the thickness of the mesh is so small that it is quite fast in some places rubbed in the most unexpected moment. To get out of a situation when there is no replacement at hand, will help any Read more…

Pipes of heating are laid, usually near the walls, and even along corners. On the reverse side is difficult not only to paint them, but even control the quality of work. To tighten the pipe enough to use to control a small mirror, and to eliminate flaws — pad of foam sandwiched in “crocodile”.   Read more…

When gluing various small items to be tightly pressed against the connecting part is very difficult. Resorted to using masking tape, and rubber bands, and thread. I was faced with such a necessity when collecting receiver of direct amplification and you had to glue the ferrite high frequency transformer. A kind of vise, or clamp, Read more…

it would be easier to bend the nail! And if you need more than one… dozen! Well-known methods in such cases is not justified: the tedious, time-consuming. The proposed device is universal, gives you the opportunity to facilitate the work, though not to say that absolutely. Its main advantage — simplicity. Only need a suitable Read more…

Love tinkering in my spare time. Probably most often use the hammer, but the mounting of the striker on the handle with a wedge it seems to me unreliable. So I decided to make this connection otherwise. Cut from steel plate and rectangular washer and drilled in its center two holes. Put on the handle Read more…

To work with vibrating hand tools or tool is good to have a “antifibrogenic”. To manufacture them is not difficult. Enough to the palms of the usual gloves to sew the strip or plate of porous rubber.   A. MATVEICHUK, 3аводоуковск, Tyumen region.

Usually vegetable seeds, berry and horticultural crops are kept in bags, which is not very convenient. Much handier to keep them in a special box with drawers. It is easy to make from vacant matchbox boxes: simply glue them together.   V. GOLOVASHIN, Rybnoe, Ryazan region.

Usually water from the tap, even if it is slightly unscrewed, flows with turbulence and spray, which is especially frustrating when under a stream of running any job. A kind of handler in this case will serve as a piece of medical rubber tubing of suitable diameter. You can use PVC, usually used for electrical Read more…