I bought a plastic baby bath. Comfortable, beautiful, but where is her store! Decided it was better just to hang on the wall in the bathroom horizontally. This is enough for two brackets, hooks, bent over the steam from strips of thick plexiglass. They are attached to the wall with screws in a line at Read more…
In joinery and carpentry, we often need to inflict a series of neat parallel lines on the workpiece material, for example, when cutting plywood marking wide boards and tai on. For this there is, of course, a special tool. However, if such devices at hand was not, help out… clamp. Hold it line and proceed Read more…
Many umbrellas of the spoke ends plastic ferrules, to which the threads are attached to the edge of the fabric dome. When threads are ground, loosely fitted tips lost, and the proper tension of the dome does not work. To replace the loss possible, turning down the end of the spokes with the pliers in Read more…
If you will need a soldering iron with a fine tip, navate on the rod of a powerful soldering iron a few turns of copper wire and bend its end perpendicular to the main sting. Sharpen it, solder, and you have in your hands a new tool.
If you are caught in the woods or on the river Bank or a branch broken off a bough, at which time the core is turned into dust, but the outer layers still strong — saw the discovery of a number of rings, where you want to locate a good sand paper and cover the Read more…
Everyone who was engaged in the sanding of new floors, door Polota and other surfaces of non-metallic materials, knows that abrasive skin quickly become clogged with wood dust, paint and putty. Even worse, if you want to wetting by water, and on hand — just paper skin. I made and checked to work rather unusual Read more…
Quick-drying underwear on the balcony, loggia, but how ugly looks like a house from the street. Offering a simple design linen dryers with removable cords strained at the railing, and therefore hidden from prying eyes by a fence of the loggia. Brackets here is a pair of metal parts with a number of holes. Is Read more…
If your jig saw is not the case or you have extra, it can be used as a small hacksaw. Because screw clamps instead of the thin blade securely enough hold and the saw blade. As the hook for this figure carving tool is not intended frame can be shortened by about half, sawed off Read more…
I think that to get firmly entrenched in the Board Kuhlman button convenient this device. The sharp edge of a metal Cup, you can easily pick up a hat of any button. A slight twist — and the “prey” will be in the trap, and attached to the bottom of the magnet (for example, from Read more…
be easily treated with sandpaper, if you use this wooden rod of suitable diameter. The operation is performed through wrapped around it a piece of sandpaper required granularity.
