SCREW IN SUPPORT

Of course, the wooden parts connecting screws — most reliable. But as the load places on the legs of chairs, doors loop — hole is gradually being developed; the same occurs with the shrinkage of the wood — hole becomes slightly larger than the diameter of the screw. To restore the strength of connections possible Read more…

“HAZIRS” TOOL

Every good master has his way of placing the tool. I think readers may be interested here is a version of the wall storage of the metal strip, for example, edging, containers. By bending it, as shown, and attached and the wall, get soft clamps to firmly grip the tool: screwdrivers, chisels, files, pliers, hammers.

CALIPER

Among the tools and devices for measuring the internal diameter of pipes and other cylindrical bodies is probably the most simple. Made of plywood, plastic or metal, cut an isosceles triangle with a hole of handle. On its lateral sides at the same distance from the top of the apply risks by placing near each Read more…

MICROBALANCE

MICROBALANCELike it or like machine grease and the saying “porridge oil will not spoil” is applicable in the technique not always. Excessive amount of it even at nodes where the friction should be minimal, is not of benefit. But if oil gets on the friction parts of gear, the mechanism may deteriorate. Those who greased intopractice of the tape or the mechanism of EPU, knows what precision is necessary to carry out this operation. Conventional oil can do.

Read more