Advice

Someone had to “dissolve” wide Board into several strips, he knows how time consuming this operation. And here not save even a special “bow” saw — work them as hard as conventional hacksaw. When I cut the prozhiliny of the fence boards to the fifties, already in the first half realized that the lion’s share Read more…

Files generally are available without handles, and the latter may not be available at the time of purchase. To make them yourself is not everyone’s strength. But this method is available to all. You’ll need only two-three empty spools from under the thread. Please note only that in the first need to expand the hole Read more…

As proposed in the journal version of the work alone on the two-handed saw (with a rubber strap or tape) is not very suitable for winter, Thai rubber in the cold loses its elasticity. You can do without any additional equipment. Just need to move the handle to stick it in the tool holder, the Read more…

If in a ballpoint pen out of toothpaste, and long rods at hand was not, take the short splice and its extension from the part used stem, cut off from the writing site. To the working rod wrote flawlessly, its tube should be communicated with the atmosphere. Therefore, carefully wash the extension after removing it Read more…

Varnishes, paints, enamels often Packed in tin cans with a wide lid-stopper. But no matter how tight it fit, the tightness over time is broken: part of the contents when pouring over the edge dries up on the edge and prevents tight closing of the jar. However, when the expenditure of material in small portions Read more…

I travel frequently, so I made myself comfortable Hiking hanger, which is even more compact folding, produced by industry. Of the device it is clear from the figure. The tube can be any, say, plastic. This hanger will be even leaner, if it is to collect two tubes, entering one another. Locking them in extended Read more…

Carton steel doors or bars on the Windows to the concrete or brick walls specialists usually fastened with sharp pins. If you need to remove the box, the case is difficult to pull the pins very difficult, and drown them interfere with the flattened outer ends. For these purposes I used the M10 screws, drilled Read more…

If you don’t like the sharp sound of your electric bell, put on his bell under the hammer of the vibrator piece of adhesive plaster. And make the sound more melodic by replacing the bell rolled into a spiral of thick steel wire from the chiming mechanism of the old wall clock.

Now self-respecting Shoe company pack their products in such a beautiful and, most importantly, strong boxes, which brought a purchase from a shop, makes you wonder what would it eat? Several of these packages, it is possible to collect is shown in figure cupboard for shoes and Slippers, glue the boxes together. If necessary, the Read more…