The author and Creator of the Rover, about which speech will go, — Boris Ryzhov — a longtime friend of the readers of our magazine. Photographs of the manufactured machines (crawler and six-wheeled all-terrain vehicles) were published in the journal in 1990 (No. 7). But the desire to create and to make a more perfect vehicle all-terrain since it gets cold. Professional aircraft mechanic and restless Amateur designer, after retirement, continued to build all-terrain vehicles. Why? Yes, until (and, apparently, for a long time) to get to most places in the depths of Siberia, where he lives, Boris Nikolaevich, it is possible only on such machines.
THE ROVER IS CHANGING THE SHOES
As you know, in order to drain the automotive engine waste oil, have to drive the car on the rack, or to use the repair pit. However, if the garage has quite a powerful vacuum cleaner, a platform or pit is not required. The vacuum cleaner will allow you to perform this work quickly without spilling while a single drop of dirty work.
Without exception, all car owners sooner or later have to deal with repairing their vehicles. Well, of course, if this has to do “planning”, but nevertheless need to be prepared for emergencies and be prepared. Therefore, it is necessary to have the maximum number of tools required. In most cases, the basis of such a set is the set of socket wrench made of various domestic and foreign manufacturers. The proposed device will be able to complement this kit, and will expedite the repair.
Not so quickly wear out brake disc of a passenger car. But there comes a time when this detail is replaced by new, and old simply thrown in the scrap.
Disassembly of the front suspension nodes, rear-wheel drive automobiles requires the use of special devices. According to the recommendations given in the book V. A. Vershigora “Cars “Lada” models BA3-2103 — 2107 and their modifications, and repair of the Device” to clear the fingers of the upper and lower ball joints needed puller 7.7801.9513. You can find him only in the workshops of service, sales they are not. Moreover, this puller has a rather complicated structure, to make it their own.
For homebrew, working on motorcycles, always up to date selection of the optimal variant of the air filter. The most common available contact-oil (lubricated with a thick oil mesh or nylon “thread waste”) and paper (automotive type) filters. Last predpochtitelno: they provide a high filtration rate (up to 0.98) and low resistance to air flow, but their dimensions are very significant.
