DIY

Unusual chair-bed designed specifically for small room area of 13.5 m^2. Its peculiarity is that it is not a convertible, as it were, telescopic: it has two series-extendable drawers, one of which is for bedding. It is in a separate compartment, there are four stand-feet. Any mount they complicate the design, so it was decided simply to substitute the legs under the drawers in the nomination. And the body of the chair is supported by four dual wheel furniture.

The first impression when you look at this unusual furniture — it must be not very stable and probably too fragile, not intended to be familiar to such items load. Indeed, could it be reliable for, say, a table, whose each leg, bent, rests on the floor not in the place where it is traditionally supposed to be, and the place nearby, which, in turn, “leaves”, which is also in a strange position, and the last is first on scene? What kind of resistance, it would seem that the question if front be one leg front and… rear and rear — rear and one front…?

Like most moms fed their baby? Usually sitting at the table and placing the baby on his knee. But mother cannot see the baby’s face, and he can’t see mom: he involuntarily looks around, and turns out — turns. Meanwhile, his place at the table, he may have already since I began to confidently sit. But for this the child needs a combined chair having seat and table top. For example, as proposed by the Hungarian magazine “Earmaster”.

Comfortable and high-performance tool — the jigsaw is much easier and straight and curved sawing of wooden workpieces. Simple Supplement thereto, proposed by the Hungarian magazine “Earmaster” will allow to simplify such an operation as getting round parts, and any radius. It is reduced to a minimum preparatory actions: on the graduated scale set the required distance from the center of the future circle with the slide bar; its awl stick in the center, and with the opposite end in the slot of the guide handle install jig now his blade goes in a circle, as attached.

If science fiction is subject to the future, for a child’s imagination — the surrounding present: it is a folded piece of cloth starts to act up like a child and tilted the chair turns the engine in the plane. Boys, for instance, enough to ride a simple wand, to represent himself as a tamer of wild horse. That’s why we offer Hungarian magazine “Ezer-person” self-made horse-rocking chair at first glance, can be largely loses the store painted handsome, but only— in the eyes of an adult.

The proposed design of the jigsaws are manufactured in workshops Menzelin-sky teacher’s College in Tatarstan Republic. To ensure the reciprocating motion of the saw in that jigsaw used a crank-but-polzuny mechanism of the compressor of the refrigerator. With this jigsaw you can cut the various contours of plywood and boards up to a thickness of 30 mm.

Good to have a small coffee or serving table, especially if it is still mobile. It would seem that it’s enough that he was on wheels. But in the version proposed by the Hungarian magazine “Earmaster”, table added another advantage — it is not just mobile, but also portable: it had a handle like basket. Moreover, in the working position of the table handle is not noticeable because it appears flush with the table top, and to transfer rises to the hinge the hinge is fixed and the rack limiter.