Assortment of paints (coatings) are currently quite wide, and therefore, in such a variety without the advice quite difficult to understand. Get expert advice from the seller not always possible.
Furniture with doors are not always easy to use. For example, music is better to have in the cupboard, and an open rack with shelves. This facilitates access to both the instrument and its accessories. Not accidentally there are many options of this furniture. For example, as shown here.
A painting works it is better to perform a “brush” made of foam. You can just stick a piece of foam to the wooden handle. However, we recommend you to make a special holder that gives the brush flexibility.
One-room apartments of the inevitable universality of the dwelling. The only room is to serve as the living room, bedroom and office. To combine such heterogeneous requirements is possible, if you divide the space into specific zones, simply “remake” the room so it was convenient for work and leisure.
The phenomenon of weightlessness allow you to demonstrate on a normal school lesson original instrument, developed at the physics Department of the Khabarovsk pedagogical Institute, the author of the designs — candidate of physico-mathematical Sciences, associate Professor Zhukov.
In a kitchen furniture factory production somehow not provided any special locker for storing vegetables. For croup and utensils easy to adjust and offered by manufacturers of various kinds of cabinets or speakers. But for a small supply of potatoes, onions, carrots, beets would be good to have fitted a smaller capacity. Similar design in the form of neat tables offers Hungarian magazine “Earmaster”, description of the scheme and which, I think, will interest our readers.
Burned a soldering iron, remained unfinished design… to Get out of the situation will help the soldering iron-impromptu. Cut out a 2-mm fiberglass charge, shape and size of a soldering iron. To provide two holes for ersatz heater, which works fine 10-watt resistor type sew-10 resistance 1 kOhm. It is necessary to connect a “wire-wrap” (about this method of installation, see the journal “modelist-Konstruktor” No. 4’2001), missing in the holes in his conclusions, the power cord burnt the soldering iron (as insulation it is desirable to use heat-resistant “sleeve”).
Flexors metal sheets are devices specifically designed for bending thin metal into shapes that are used in various applications, such as cornices, air conditioners, etc. This article will help you to construct the bending machine of medium complexity work, if you are one of those who prefers to do things on their own.
The hostess, having flat knitting machine “Severyanka”, appreciated the convenience and time savings that it brings to the house. From a simple scarf to a beautiful dress with a complex pattern — all available to “Northerner”.
Cutting carbon – dioxide laser is the process by which materials are cut with focused, high-energy beam of light that is generated by a carbon dioxide laser. The laser beam is focused on a specific location of the material being cut and the heat generated forms a small, localized melting throughout the thickness of the material.
