It would seem that not so long ago appeared in our kitchens “blue light” — the first of the Saratov gas. The enthusiasm that accompanied the displacement of them wood-burning stoves, kerosene stoves and kerosene stoves, over time, subsided. Gas was not an ideal fuel for stoves. The allocation during the combustion of harmful substances, the constant danger — and suddenly blow out the flames the wind and the room is filled with explosive mixture, — all this has led to the fact that gas stoves were gradually superseded by electric. The advantages of the latter compensate for even that heat the burner costs a bit more expensive.GAS — ELEKTRO AS
It would seem that not so long ago appeared in our kitchens “blue light” — the first of the Saratov gas. The enthusiasm that accompanied the displacement of them wood-burning stoves, kerosene stoves and kerosene stoves, over time, subsided. Gas was not an ideal fuel for stoves. The allocation during the combustion of harmful substances, the constant danger — and suddenly blow out the flames the wind and the room is filled with explosive mixture, — all this has led to the fact that gas stoves were gradually superseded by electric. The advantages of the latter compensate for even that heat the burner costs a bit more expensive.
During archaeological excavations of ancient burial mounds and graves along with different kinds of jewelry in many meet the beautiful decorations, made of copper. Try your hand in the manufacture of such jewellery available to everyone — you just use a copper wire and a simple improvised devices, prompted by the Hungarian magazine “Earmaster”.
Once his hands were wound transformer coils, he knows how difficult, unproductive and laborious this work. It is necessary not only to carefully, turn to turn, put the wire on the frame, but do it with the necessary — is the same for all coil — tension and not make a mistake when counting turns.
For bending metal rods and pipes there are many ways and devices. Most often this operation is performed on the bending. But not everyone (even of the workman person) he has. The easiest method is when one end of the workpiece is securely fixed in a suitable place (e.g. in a vise), and holding the other bend If bend the end of the short, he put on a corresponding segment of the pipe, using it as a grip and lever. But this method does not provide either the quality or the accuracy of the bend radius.
When I see the graceful and beautiful thing, there is an overwhelming desire to do the same Start thinking how to make it easier so I made the column rack for flowers, only four parts And what came out of it, seen in pictures and drawings. I’ll tell you more as to get a rack of accessible materials. I myself first of all, in order not to complicate the work, bought a thin baluster ends of square section with dimensions of 40×40 mm (better to grind it yourself still failed) And the round countertop cut himself, with a diameter of 380 mm, thickness — 30 mm.
Dear editors! Send a description of simple tools that may be needed in the manufacture of furniture Think it will appeal to many I have it used successfully for years.
Latch shown in the figure, with success can replace a regular door chain, differing from it reliability and ease of use,— when the door is opened it just enough to push his foot and the path is clear.
At furniture factory No. 4 in Tiraspol participants NTTM has developed a vortex oil separator — special filter for cleaning compressed air used for the atomization of paints and varnishes when applied to a finished surface. Such a filter is necessary to obtain high quality coatings; trapped together with pressured air drop of moisture will lead to a local defect or colorful lacquer standing on the furniture during its final finish.
It would seem that the simple detail of any factory-production — a sign with the brand of the company, the name and number of the product. However the production of them make their accident not fit for this, created by innovators, has consistently shown in almost every exhibition of the work of innovators and inventors.
The children enjoy dynamic toys — they moved, jerked, and tumbled. Want to offer exactly this — moving and funny, resembling a gymnast on the horizontal bar.