
DRYER WITH LIFT

Hams often have to drill into circuit boards of a large number of holes of small diameter. To do this a serial drills is not very convenient — too big size. And slim drill not so easy to squeeze in a larger cartridge.
When repairing thin lines (such as a car or refrigerator), it would be good to have on hand a small pipe cutter, and for connection of pipes with swivel nuts — device for rolling. Not hurt in a home workshop and a small vise. All of these devices can be made in the form of a set of interchangeable tool based on a simple clamp of suitable size (or specially manufactured). The design will need slight modification for mounting of tools for different purposes. In the first place must be milled afterwards the groove under all replacement fixtures (cage support rollers, rolling, vise) and drill a hole for the stopper.
As we know, the sun, air and water create the most favorable conditions for rest. It is not surprising that on a hot sunny day at the seashore, on the banks of the river or pond is going as vacationers that literally no room to swing fall.