As a rule, the bath in our homes or closed with boards or bricks, followed by finishing the tile or under it is a cupboard with sliding doors, in which you can store a variety of things. I decided to decorate a bath in a different way, giving the opportunity to use to store the same things the space under the bath and the side of her.
Existing jigsaw has a number of disadvantages. Minor fluctuations in the amplitude of the nail (5 mm) does not allow to increase the speed of cutting both thin and thick plywood. Machine heats up quickly and breaks down. How to increase the amplitude of its oscillations? Indeed, in this case, the cutting speed is the magnitude of the advancing nail the plywood in one pass. The exit is found.
Today, when in our house, figuratively speaking, already knocking personal computers, it is necessary to take care of the job for them. Not here to do the usual Desk: need ergonomic it solution, special equipment, otherwise avoid the consequences is well known to all who have to sit in front of the monitor: low performance, an ache in the back, neck, headache, and, most importantly, more damage to vision. Besides the standard table does not remain places for storage of disks, refilling paper in the printer, not to mention how to make reference books, make notes and so on.
Small garden stove. Steel jar is still quite common. They are used for transportation and storage of paint, varnish, engine oil, diesel oil. Here’s an old 40-liter flask inspired me to think about further application is to make her oven-stove for burning of garden waste and for heating greenhouses.
For individual construction is often necessary to make processing of logs for construction of wood with different cross-sections (beams, plates, boards). Due to the large weight of logs and the lack of a reference plane such processing conventional saw and planer (without additional equipment) almost impossible to do. This task I chose the following way.
There just are not invented contraptions to the front door had closed by itself. This special spring hinges, and cargo the device with counterweights and a pulley system, and various spring or rubber band. There are commercially available, but, unfortunately, they are not without drawbacks: some are too complicated and quite expensive, others are inconvenient to use or unreliable, easily damaged. Therefore, home designers continue on their own to solve these problems, as evidenced by the proposed content selection submitted by readers. In the winter the doors of the entrances of our homes are often left open. This leads to overconsumption of energy required for heating staircases. To save precious heat needed simple automation.
I work in the locomotive depot of the station Yerofey Pavlovich, produce visual AIDS for teaching assistants machinists of electric locomotives. During the work on the stand pneumatic circuits I have not found a suitable tool for sampling grooves complex profile and decided to make a cutting tool that brings together in its construction, some carpentry. Thus was born the plane-“harvester”.
We continue to acquaint our readers — owners and garden plots — with non-traditional designs of garden furniture, and published in the Polish journal “Prob myself.”
If you are facing a problem to create a cozy and, most importantly, cheap hallway, I suggest one of the variants of solving this problem.