Good recommendations

Usually, to make a loop on the wire to connect to the switch or outlet that electricians use pliers. Two pins Ø 4 mm, installed in front of the handle of a screwdriver, can successfully replace them.

The end of the stick in the hole of the butt is held by the wedge. But eventually, the knot loosened and then the axe is to work not only uncomfortable,but dangerous. If time and opportunity “to peremeschenii” ax no, do at least a simple temporary “ersatz”-mount – tighten a few screws with the so-called Read more…

Virtually any stop can be turned into a joiner’s workbench, if you use a removable focus of clamps and riveted to her “comb” of steel band (for example, saws).

Two-handed saw because so called that it requires the application of tractive effort of the two hands for which at each end there is inserted on top of the wooden handle. But experience has shown that if a single handle insert from bottom, then from that end of the saw, you can work for one Read more…

As you know, carrying sharp objects without case – for example, ski poles, public transport is not permitted. Existing ferrules, no skier no use: they are plastic, from the cold lose their elasticity to be back on lost. I have for several seasons used homemade tips red medical tubing Ø 10 mm. rubber held tightly Read more…

When gluing different items instead of the clamp you can use a clamp consisting of two strips, wire and click. The arrangement of such clamps can be seen from Fig.   S. FEDORENKO, g. Tsyurupinsk, Kherson region.

I want to give advice to those who deal with a variety of hot water or heating installations — what to paint places that are exposed to high temperatures. It is known that none of the coverage here of long held — exfoliate and schelushenia. So I took aluminum powder (“silver”) and mixed with liquid Read more…

When watering flowers, located on the saucer, spilled water under the pots leaves dirty spots that will eventually destroy the paint coating. If you make a lattice, as shown in the figure, to monitor the cleanliness of the garden will be much easier.

When working with wood one of the main tools are chisels or chisels. Their sharpening depends on the quality of the product. As a rule, a similar tool to sharpen the entire surface of the cutting part. And when the blunt chisel will have to re-process the whole tip on the machine. Offers little to Read more…

Garden wheelbarrow will last much longer if stands are to be equipped with additional rubber feet, taken from the old buildings of the radios.