During the canning of vegetables and fruits have to deal with wet and hot banks that need to move or carry. So they don’t burn or slip out of hands, lignite from a piece of wire with a diameter of 4 mm here’s a grab-handle. The bar itself will serve as the neck of the Read more…
To view footage of film is convenient to use diazapam, making cuts to the film advance. D. NOVIKOV, Krasnoyarsk
Tape, knife and a stand for hot dishes can be made of conventional spring. To place the knives, the spring must be mounted on the wall,using wooden strips or metal plates. But if it roll into the ring, hooking the ends, you get a handy stand for hot dishes. For the best connection of the Read more…
As you know, along with the obvious positive properties of the collet legs of a compass also has its drawbacks: requires the stylus is of a diameter; and if it is broken — remove it not so easy; adjusting the length is difficult, and so on. Not to mention the fact that it is impossible, Read more…
The device shown in the illustration will be useful to all house masters, making furniture with his own hands. With its help you can easily and quickly roll while gluing forever lagging edge of the decorative film or thin plastic.
A kind of umbrella made of sharpened timber th a plywood “roof”, will help protect the tomato seedlings from hot sun or a sudden hail.
In fact, the “floors” can be very different, as well as the selection of plates and saucers, depending on the purpose: fruit, berries, candies. It is important that all suitable options proposed the principle of multilayer Assembly. The base vase is a long bolt M4 flat-hat; however, an other solution, say, using the wheel spokes. Read more…
Pockets home worker during work, usually “clogged” with all sorts of “needed stuff”. To increase their volume and provide easy access to help special apron with pockets made from old jeans.
When fails the “proprietary” socket or the plug, replace it first got under a hand not worth it. It is possible to make an exact copy of this electroelements, virtually indistinguishable from the original. First, we need to make a matrix into a cell from sheet metal to kalit to half epoxy resin and plunge Read more…
A nail and a screwdriver located as shown, will help you out, if in the bustle of work had disappeared the key from the Chuck of the drill and the drill bit must be urgently replaced.
