Good recommendations

When pouring the boiling water from the kettle didn’t fall cover, fabricated sheet metal a simple device that secures the lid in an inclined position of the kettle. C. DACKOW, Novovyatsk

Do not rush just to throw move zip. She will have some time to serve, if only the rear part of the carriage gently squeeze the pliers. A. DREMUK, Voronezh

carrying large pieces of plywood, glass sheets or other sheet materials use prisposoblenie made of nylon tape, wire handles and a wide, flat hook.

The traditional method of fixing the hammer on the handle is wedging. Over time, however, the knot loosened and it is necessary to change the wedge or pen. I suggest to fix a clogged wedge with a screw or rivet passed through the bore in the sidewall of the through hole.

When ballpoint pens disposable over pasta, don’t throw it away. Pull the burner Assembly rinse it with Cologne and solder the electrical conductor. Passing the wire through the hole in the handle and setting the knot on the place you get comfortable pectroscopy for the tester. O. GORYUNOV, Bishkek

With prolonged use of a blowtorch is often out of order pump mounted in the housing. Offer instead of the piston set machined fitting with valve core inner tube, which is secured by a regular nut with a gasket made of petrol-resistant rezny. Now the injection of air can produce a conventional automotive pump.   Read more…

Commercially available brushes have durable plastic pile, and cover with the mounting node of thin plastic is weak. To extend sluzby brush, you need the screws to install the metal tube is pre-sawn its axis and tilting the petals. A. VASILENKO, Zaporozhye

Everybody knows to “hide” the head of the screw or nail, a hole must be countersunk. In a domestic environment this operation is usually large diameter drill. But it kvostik drill does not fit, and have to work in the “manual mode”. If the holes a lot, mozopi provided. To avoid them it is necessary Read more…

To make a real stained glass with lead lining at home difficult. But his color and pattern can be reproduced on glass, using artist oil paints diluted with lacquer fir. Of course, the coated surface must be degreased. A. NIKOLAEV, Odintsovo, Moscow region

The gap exposed between the gate and the column will cause respect for the skill of the Builder from any incoming to the site. To do it by using two identical plate thickness-supak strubin and wooden planks.