To the front entrance door slammed I equipped them with shock Bicycle pump. Now they close almost silently. The pump is mounted pivotally in brackets. mounted on the door and the doorframe. One swivel axis passes through the M6 screws, screwed into the outlet hole for the pump hose, the second through a steel Read more…
You can, of course, brush them, however this will not last long. More radical means of plastic washer embedded between the half-loops. There is another way to get rid of the squeak. You need to shorten rod one half loop and put the loop inside a steel bearing ball.
The one in the house heating stove or fireplace knows that, no matter how ostorozhnichat with the poker hands will still be covered in soot. This will not happen if the poker to put on the moving handle of a metal tube with a length of about 120 mm, is first sawn along it, Read more…
Insulated Windows in the winter, the glue is not paper, and fabric strips. Not paste, and soap. Such strips can easily be glued and be removed easier with the onset of heat and, if necessary, can be a few years. The harvested strips of different widths: 4, 6, 8 centimeters long, 80 centimeters. O. EVDOKIMOV, Read more…
For sewing normal sewing machine materials such as tough leather or canvas, offer to complete the regular presser foot or to make a new one. It is necessary that the cloth was not pressed to the soles of the feet, and rollers to cut it Windows. This foot is suitable for any type sewing Read more…
A crack in a car battery can be repaired with epoxy putty and the battery still will serve. The technology is quite simple. Cracks on the spot doing the groove, cleaned and degreased it with gasoline or solvent. Then the groove is filled with a filler withstand the day — and you’re done! K. Read more…
Today literally stumble over used in metal tins of drinks. I was thinking of what to adapt them, painfully good material fine silver, not stainless. Finally I came up with: I cut the bottles with scissors on a small rectangular plate, which is then giving labels for seedlings. The inscription put dried-up ballpoint pen: Read more…
I want to tell you about a rather unusual method, the obtained shaped glass without a glass cutter. Its role is performed by the wire twisting (that are attached to wooden poles buried in the ground concrete column-“stepson”). In the twisting choose a place where the gap between the overlap of wires equal to Read more…
This device (see figure) is used for drilling holes of small diameter, which is often required in the manufacture of small structures, models, repair of printed circuit boards. For the manufacture of tools need use metal rod ballpoint, pre-cleaned from the paste. The end of the rod with the ball removed. Drill which is attached Read more…
Indeed, the problem of storage in the apartment forever preventing bike will be able to decide if you pin at the top of the corridor wall a kind of hanger for him. Hanger consists of two hinged bracket hinged mounted on a common base. The brackets top holes under the frame of the bike.
