What happens if you cut a cylinder and two parallel planes at an angle to its axis and to replace the resulting “pancakes” wheels of a conventional car? It turns out that in the end we will get the vehicle of the increased passability. On normal roads this car moves exactly the same as a car with standard wheels, because at any point, the distance from the road to the axis remains constant, equal to the radius of the cylinder. Of course, with the difference that leaving a trail is not straight, but curved in the form of a sine wave.IT IS EASIER TO WORK
To saw thin-walled metal pipe clutched in a vise — employment is not easy. Not only because the accompanying screeching grates on the ear. The work itself is difficult: in one direction the saw is more or less easy, but the other can’t get. Especially if the material is soft, e.g. aluminium. Put in place Read more…
The coil is the most convenient form of packaging thin sheet materials and for the transportation and storage in warehouses. Foil, a synthetic film or paper in a tightly collapsed become a monolith, convenient in handling and are not particularly suffering from the hard grips of different mechanisms.
This little car (Fig. 1) I did back in 1972, and it is already my second son, Sasha. He was only three years, but he leads the electric car is almost like a real chauffeur. The car became a favorite toy of kids all around, and how else — steering, brakes, lighting, sound signal, turn on the rear — all on this car!
Built-in furniture for country attic. As a rule, country attic (the so-called well-maintained loft happy owners shestietazhnyj plots) — the room is not too large, so that linen cupboard and a couple of beds can take most of it. Meanwhile in the attic for placement and cabinets, and beds it is possible to use the volume located between the sloped roof slopes and vertical walls.
When installing the radio a lot of time to spend on processing wires. First of all you need to remove the insulation, clean, tinned with stinging, and then proceed to soldering. Except for this the soldering iron, necessary lies, cutter and blade. And together with the isolation often cuts off part of the wire cores, n then have to start all over again. I propose a simple adaptation to the soldering iron. The eye eliminates unnecessary hassle, save time, improve the quality of construction works.
Japanese car Mitsubishi lancer of 2007. Continuous update — here is one of the main principles of creation of high-tech consumer products. Constantly decreasing period of the market entry of new improved cameras, mobile phones and more productive computers. Is not time consumer is to buy “the best of” the perfect digital video camera or pocket PC, as a manufacturer throws on the market a new model with better consumer qualities, leaving the buyer with the “old”, released only a year ago an electronic device on hand.