Each apartment will eventually need an upgrade. And in most cases to carry out this work do not necessarily cause masters of plant personal services: much quite on forces to execute and SMCM using the following recommendations.
SCREWS TRANSFORMER
When a bike will travel thousands of kilometers and the spokes on the wheels spabot, tighten them — not an easy task: rust and dirt do the job just unbearable. Offer a simple way to without any problems to adjust the tension of the spokes. This will require a transformer (250 watts, 220/12), the wire Read more…
In our small apartments recently settled a combined sectional and furniture. And — please note! — the more expensive and better quality headsets, the less it pseudotolerance, pasted paper or film on top of the bones: the texture of natural wood, which for years we’ve been hiding under a dismissive fashion mixed colors plastic, again pleasing to the eye, its presence in the interior has become a symbol of good taste.
The original self-similar route, combining elements of technical creativity, sports competitions and physical training, developed a young technology of the German Democratic Republic. Its main distinguishing features — the use of motorcycles instead of a car, replacing the grooves under current-carrying copper bus and rail and, finally, the supply of power from generators installed on the bicycles.For the manufacture of the route will need chipboard or whether-ists of plywood with a thickness of 8-10 mm In accordance with the selected configuration of the “racetrack” and the dimensions of the allocated space cut strips (straight and curved) width of about 300 mm and wire them. The surface of “road” paintings it is best to paste over glass or sandpaper.
The debut of the first Soviet diesel truck yaz-200, developed at the Yaroslavl automobile plant, held in 1945, was successful. After the traditional show of the new machines in the Kremlin party and state leaders of the country truck recommended for serial production.
Many attract-models tracked vehicles. However, their reproduction is more difficult when it comes to making tracks. Offer the readers of “M-K” I have developed a method of manufacturing such a mover… from the tree. This caterpillar doesn’t have many joints: it consists of tracks, strung on two closed in a ring of nylon fishing line. You first need to glue a wooden profile, which is the cross-section shown in the figure. To “that will require thin strips of plywood and rails of oak or beech, its assembling is held with epoxy glue. Into the grooves better, lay a nylon fishing line — then they will not be filled with adhesive, and after curing 1его thread is easy to remove from the workpiece.