If in the famous Guinness book of records recorded the simplicity and manufacturability, today we present to your attention a model would be the first contender for such a record. Especially attractive it is for young athletes. This model is a “bouzouki” with the engine working volume of 1.5 cm3. And all that will be needed for the manufacture of its frame, — a little more than five meters pine slats section 3X12 mm. They are easy to saw on the machine “Skillful hands”. The weight of the rails is about 100 G. Hence, with a relatively large wing area (dm2 21) it is easy to achieve a low specific loading and good maneuverability.RECORD HOLDER… SIMPLICITY
If in the famous Guinness book of records recorded the simplicity and manufacturability, today we present to your attention a model would be the first contender for such a record. Especially attractive it is for young athletes. This model is a “bouzouki” with the engine working volume of 1.5 cm3. And all that will be needed for the manufacture of its frame, — a little more than five meters pine slats section 3X12 mm. They are easy to saw on the machine “Skillful hands”. The weight of the rails is about 100 G. Hence, with a relatively large wing area (dm2 21) it is easy to achieve a low specific loading and good maneuverability.
Not long ago I discovered, in his home workshop old Microdrive MK-12-In, preserved, apparently, since childhood. What to do with it? Throw a pity, and here decided though somehow to use.
When repairing thin lines (such as a car or refrigerator), it would be good to have on hand a small pipe cutter, and for connection of pipes with swivel nuts — device for rolling. Not hurt in a home workshop and a small vise. All of these devices can be made in the form of a set of interchangeable tool based on a simple clamp of suitable size (or specially manufactured). The design will need slight modification for mounting of tools for different purposes. In the first place must be milled afterwards the groove under all replacement fixtures (cage support rollers, rolling, vise) and drill a hole for the stopper.
Wallpaper — this word spins, usually in the head before the repair. Wish they were beautiful and fashionable, to blend in with the furniture… But run around shopping, not always pick up something about the dream. You can, of course, triple the quest to connect friends and friends… We invite you to direct your efforts in a completely different direction. Buy white emulsion paint and a few jars of conventional art gouache — and you forget what part in the shop “Everything for home”.
Bike “Tourist” lives up to its name. He’s not heavy, quite durable, easy to move, has a good ergonomic proportions, fitted with four-chain transmission; it may be two racks, generator with headlight, speedometer, rear view mirror, audible signal, reflectors and stand. The best rating is a big demand for it, which, unfortunately, is not satisfied the domestic industry.
As we know, the sun, air and water create the most favorable conditions for rest. It is not surprising that on a hot sunny day at the seashore, on the banks of the river or pond is going as vacationers that literally no room to swing fall.
To have a nice helmet you want to each the rider and the stages, and the requirements of the traffic police should be strictly observed. Popular hats-integrals produced by the industry, are in stores extremely rare, and the price is not small. But it turned out that to make “branded” integral and ourselves: we, a group of motor-fans, for several years, using the improvised helmets.
Somehow, “walking” on the Internet, on the website www.snowmobile.ru saw a homemade snowmobile Valery Pavlovich Smirnov, who I really liked. From the moment I came up with the idea to do something like that, in the end, and realized “in metal”. Principal longitudinal elements of the frame – spars – made of pipe sizes 28x25x2 mm, other elements – from pipe – 25x25x1,5 mm 20x20x1,5 mm.
