MODEL CONSTRUCTION

PUZZLE CRACKER

27.05.201813.05.2018Own hands

This lock is good for garage doors gate or even garage even from the inside, at least on the outside. It is durable, as massive, and has no arch, where the attacker can insert a crowbar (against whom, as we know, no reception). The principle of operation is similar to that already described structure (“modelist-Konstruktor” No. 8’98), but executed differently.

Is the castle of hull, pin, latch, two pins, screws and key.

INSTEAD OF SPRINGS

27.05.201813.05.2018Good recommendations

In many miniature clamping devices, from popular with electricians and ham radio “crocodiles” for the temporary connection of the conductor to all kinds of clothes pegs – used twisted or flat spring, which at the wrong time can break. In this case, will help out any band, is wound in the jaws of the clamp, Read more…

TRICYCLE-AIR SUSPENSION

27.05.201813.05.2018Auto Moto Service

A prototype of the proposed tricycle car was made by me on the basis of the motorcycle “IZH” chamber with two leading wheels and a steering ski. It seemed that the desired result is achieved: the machine ran well on the snowy road. True ski on Packed snow bad coped with its task. Spring revealed other shortcomings of this design. Riding on the roads in the thawed disabled even ski in stainless steel. Instead, I put the pneumatic chamber from 12.00—18,” but now more heavily affected by the lack of differential lock — a snowmobile was very difficult to manage.

GRANDMA’S CHAIR

27.05.201813.05.2018Own hands

It is not only convenient for travelers: the presence in the room rocking chairs gives the home a special warmth. However the classic design includes many complex curved elements, therefore, almost inaccessible to the independent production. But modern materials allow to simplify the technology, preserving all the dignity and even the appearance of rocking. And that, above all, as evidenced by the Hungarian magazine”, Earmaster”, with the ability to use for sidewalls thick plywood or particle Board: cut a single sheet shaped parts, which replaces a set of traditional curved elements.

THE LOCK WILL BE SAFER

27.05.201813.05.2018Good recommendations

The lock bolt is in the mailbox does not always withstand the encroachment of the feeder bullies. Too primitive its form is thin and the iron from which it is made. But if you replace the stock bolt with steel plate cross-section 20×3 mm, bent as shown, so just the box, no one will open.

CRANE MOTORIST

27.05.201813.05.2018Auto Moto Service

The owners of cars often have to be transported in the trunk of the massive thing. If no helper, then alone to ship them in the trunk or unload pretty hard.

Previously, I also had to strain with a tiller that weighs 55 kg. Now loading-you load, not a problem for me — I made myself for these purposes a special device. It is clear that it can be used not only for the cultivator.

BATTERY, YOU TO REFRESH?

27.05.201813.05.2018Good recommendations

While still in school, I restored the spent battery pocket receiver rather primitive, but effective way. With pliers gently removed the graphite rod and filled the battery with water. Then waited until the water completely evaporated, put back stem — and battery-some time worked better than new.

THE BREAD BIN WILL SERVE

27.05.201813.05.2018Good recommendations

It is not necessary to throw now unfashionable or end-of-century metal breadbox – it is more than one year can serve as a great tool box. It is only necessary to remove it movable fold-cover (or the flap if the breadbox-section) and in a suitable place, cut a hole in the wall and attach with Read more…

CHAIR “ROLY-POLY”

27.05.201813.05.2018Own hands

The side of this chair resembles the shape of a seated person comfortably. Obviously, this is not accidental, because it is designed to provide maximum comfort. The fact that unlike conventional chairs and even sun loungers people can be here not only deeply leaning back, but in General… make horizontal, almost reclining position, and without leaving the chair, and not by manipulating the back. The design proposed by the magazine “Earmaster” (Hungary), allows you to do this, despite the fact that it lacks hinges.

HOMEMADE AUTOCLAVE

27.05.201813.05.2018Small-scale mechanization

Real benign stew without autoclave do not like, however, and other canned goods. However, the production of inexpensive home-autoclaves our industry, it seems, a long time will not be adjusted. Imported equipment, most people can not afford. Has to settle for a canned food factory production. But why not make the autoclave with his own hands? As a basis we can take the industrial analogues or the development of Amateur designers (for example, mini-mill V. Starostina, published in the journal “modelist-Konstruktor” No. 4, 1998). You can use my design, which I think is more reliable and productive.