Professionally working with imported cameras and digital cameras, sometimes have to face the fact, as in the most interesting moment of the shooting suddenly denied regular batteries, which leads to the loss of unique videos and photos. Not wanting to put up with such things, many owners of such equipment have several CD-batteries for fast replacement of “run down” during the filming. But it’s pretty expensive.
If you have to refill the pen or marker ink, there is a need in any microfinance, as the diameter of the housing is quite small. Rescue cover with the “nose” of the plastic bottle with oil, gasoline or glue. M. VOLODARSKY
Many of the usual glazed bookshelves wardrobe full of them. The capacity of such constructions can be extended, if the installation of the shelves one by one to lay between them a thick glass, plywood or just the Board — the Cabinet will be “broad”, much razdalis in both directions from the main shelves.
For better preservation of volatile liquid vials are usually recommended to clog with wax. However, it is not convenient, if the bubble has to be open often. It is better to use clay: the flagellum from it insulate the tube and eventually condense and thread. A. VINOGRADOV, Mogilev, Belarus
The journal “modelist-Konstruktor” I love since childhood. In Kazakhstan we have now it is not for sale, but I regularly read it in the library. Responding to the call of the editors to be not only a reader but also an author, I want to share my little experience performing turning operations on a tree without a special lathe. To do this, at the right time are available to me elektrotochilo and grip, adding to them two auxiliary elements: the Trident and the back area with a small thrust bearing (they then shall say more about). Bench grinder with a Trident causes a wooden block into rotation and vise play the role of the tailstock.
In the journal “modelist-Konstruktor” No. 10 for the year 1985 was published a description of the electronic disconnect switch (VMS) for the battery (AB) of the vehicle. The originality and simplicity of the scheme I liked. Of course, I used it on my car. And creatively. The result is a design which, unlike the prototype, allows you to successfully use e-VM even when the on-Board network contingencies of a short circuit. In addition, my design provides for the on indicator. But this added convenience.
In the process of exploitation of the deep (submersible) pumps often break. To catch them on the outside of the flange for lifting from the well is impossible due to the tight fit of the latter to the well casing. To catch the open borehole pump in the well and pull it out for repair will help homemade trap-hook, mounted on a segment of the rod is square tube. From the version published in the journal “modelist-Konstruktor” No. 2’98, and other analogues of this fixture is distinguished, above all, reliability of operation and ease of use.
Many rural residents who had not previously had the cow, now forced them to start. Because the cow has always helped humans to survive in difficult times, providing it with milk. But the owner should take care of the animal to the cow in the stall period were full. As you know, the main feed cows grass or hay. Unfortunately, the cow while in the stall, not very zealous about his food and in search of delicious blades of grass could easily trample a whole bunch of hay or grass.
In a country HOMESTEAD or farm, however small, any mechanized cargo vehicle can help a lot. It helps to save money and power. Of course, when it is simple and reliable. Preferably, the machine was small in size for maneuverability and had the power (even at the expense of speed). Permeability it should also be on top. Road on not very much welcomes the emergence of these self-made vans on the highway, so their destiny is mostly unpaved country roads. As a rule, on such roads, two clear of the track (after all, they don’t even profile), so they wheeled transportation vehicles (“ants”, power tillers with trailers is the most affordable for most owners) is difficult.
When painting with a roller you get a good smooth surface, often even better quality than that made with a brush. However, if you need the same brush to hold the winding “tracks” with the aim of obtaining a decorative pattern. To achieve the same roller, its surface is enough to pull a cord and Read more…
