On the roads of Russia today quite a lot of cars of foreign production. To feel confident in dense traffic and domestic car, sometimes you have to reinvent the wheel. Indeed, the idea of supercharging the internal combustion engine to increase its power by increasing the air pressure at the inlet is not new. However, the use of aggregate charge one of the cheapest ways of achieving this goal.
KAYAK — UNDER THE ROOF
Lightweight foam Mat that tourists usually take to sleeping in a tent can serve as a roof of a canopy for kayaks, covering travelers from the hot sun or rain. The rug is hung on wire racks installed on the bulwarks of the boat and fixed with rope stretch from the stern to the bow Read more…
From old books on beekeeping found out that Dadan, which are known even to a beginner beekeeper, as side and ceiling insulation in their hives used mats of straw cutting. I use mats of Chakan, which is usually cut in early winter. The result got rid of the dampness in the hive. But in the spring after the flyby of bees re-make of the case papers. Convinced that Chakan is a great insulation.
The brake light is on every car. However, the day (and especially during Sunny weather), the light becomes less visible. My suggestion is to use for signaling braking and still the Parking lights (so much so that at dusk and at night, they automatically would go to work in the usual, regular mode). For this customization requires minimal intervention in the scheme of the onboard network of the car, and here is the result… In its high efficiency will make sure everyone who is brought to follow the car, stop signal, in which the day is highlighted by a “retrained diodes dimensions”.
This stove I installed in the bath at their summer cottage. For ten years I use it and is very happy. The furnace body of metal, is welded from a steel sheet with a thickness of 5 mm. From the same sheet made and all other elements of the heating device in contact with the fire. About the same thickness and have the flame tube. The remaining flat parts from steel sheet of thickness 2 mm. Metal variant of the furnace design is selected for several reasons: first, for such stoves do not require massive foundations; second, it can be manufactured in a different, more adapted place and then transported and mounted in the bath; third, it quickly heats the room that country bathhouse is highly desirable.
A significant number of cruisers left in the Navy of the United States after the Second world war, some of which underwent major upgrades with the installation of a missile, not an obstacle to create new projects. Although in the 1950-ies the existing forces could handle any opponent in virtually any point of the world ocean, to stop the arms race, the United States was not going to. Naturally, the military and shipbuilding industry associated with the production of new weapons had a powerful lobby in government. Shipbuilding projects meant new jobs for the poor and new profits for the rich. And those and others were directly interested in them – at their level.
It is no accident XII-IX century BC historians call the “dark ages”. During this period, the tribes inhabiting the Northern and Eastern coast of the Mediterranean sea, meeting face-to-face, marked the beginning of numerous clashes peoples. Ancient States were dissolved in the mass of the conquerors, and the free lands of the new colony. Art, and knowledge fell into decay, was perfected as a weapon. In the center of these events was Phoenicia, a city which has turned into a different camp. But not only the fear carried with them the conquerors, has never had the Phoenicians faced with a variety of designs and decoration of ships that washed up on their shores. This was the impetus for the development of shipbuilding. In the main shipyard in the Middle East actively adopt foreign experience, adapted it to new conditions.
