The basis of design — fir or pine Board dimensions mm. 40Х300Х650 Even better to take a few boards with a thickness of 80 to 35 mm, pripojovat them to each other and glue put it on both sides of the plywood (thickness 4 — 6 mm) cheeks. The workpiece slideway (Fig. 2) apply a grid with a side of a square equal to 50 mm, and gently move it to the contour of the Shoe. Vygruznoy saw cut out detail and clean edges.
From month to month postponed the cleaning of the well from the accumulated in the bottom of a layer of silt. To do this work alone, and even two traditional methods (bucket and spade) it was impossible, and to attract multiple helpers at the same time was not so easy.
The rapid slide on the icy surface of our homemade ice sailing ice boats, feathered wing-sail, in General determined the name of winter boat — “Blue bird”. It was built at the Central station of young technicians of the Moldavian SSR and was intended to teach novice boaters the art of managing sails in the winter.
Master of sport international class, world record holder Vladimir Malinkin today recognized as the leader of korovikov, speakers with high-speed models.
To find a suitable engine for snowmobiles — the task is far from simple. Series motors in many aspects (in particular, power density) does not satisfy the Amateur designers. This makes certain enthusiasts to elect quite difficult, but the right way is to create motors own designs, using components and parts of serial.
With age the skeletal system, particularly the spine, is exposed to specific diseases. Begin to affect migrated younger overload, sports and work injuries. But at the same time and the habit of walking and by bike turns into a necessity. Thank you as with minimal cost to improve a simple road bike, making it more comfortable and “softer”. And I think I have successfully solved the problem of depreciation.
It is often necessary to break in the motor to measure rpm and fuel consumption. To set this engine on the model is optional. In aeromodelling circle of secondary school No. 112 in the city of Dnepropetrovsk made the stand design which is easy to repeat. It is possible to start and run in model airplane engines from 1.5 to 10 cm3. The design of the stand shown in Fig. Based on his grip. It is best to use a bench Vice for wood, the plane of contact of the jaws which are perpendicular to the front face of the table.
In the fall of 1978 with a group of rocketmodeler I was going to leave for a training camp in the Crimea. Literally the day before our departure from there to Central aeromodelling club have a telegram. Concise lines brought good news — the world record for flight duration by model raketoplana exceeded Valery Myakinin.
On the pages of popular French children’s magazine “Wife Anne” describes the two models of hang gliders, designed by Jean-Paul Movie and Christian Neuville. Wing Delta is an isosceles triangle with a height equal to half the base. The keel has the shape of a triangle with angles 90, 60 and 30°. Like most kites, wing “Delta” consists of a stitched frame and twine, wound on motoviltse. The cording is made of fine and durable matter, frame — wooden slats. The glider is very light, so to run it, a small gust of wind.
In 1959, the USSR Ministry of communications has ordered the design Bureau of the famous Builder of helicopters N. I. Kamov unusual for this size car — a snowmobile. Developers were tasked to create a vehicle that could provide postal services in remote in the winter areas of the North, Siberia, Kazakhstan and Far East.