Devices leading only pilots, in General, very similar in scheme and design are very different in administration. The reason is simple: everyone builds a microplane “under his hand”, presenting to him the more requirements, the higher the class of the constructor. But even the slightest innovations often lead to a significant change in the flight properties of the model. Therefore, when designing pilotazhki impossible to do without hints of a rich and practical flight experience, solid theoretical knowledge.PILOTAGE EIGHTIES
Devices leading only pilots, in General, very similar in scheme and design are very different in administration. The reason is simple: everyone builds a microplane “under his hand”, presenting to him the more requirements, the higher the class of the constructor. But even the slightest innovations often lead to a significant change in the flight properties of the model. Therefore, when designing pilotazhki impossible to do without hints of a rich and practical flight experience, solid theoretical knowledge.
None of the types of modeling to the apparatus is not presented at the same time so many conflicting claims as to RC jumper gliders. Imagine that you need to design a machine that combines the properties of high-speed models, gliders-paritala and apparatus created specifically for ustanovlena of records range.
RC model aerolaser (Fig. 1) easy to manufacture, and it does not require scarce materials. Do this even for a Modeler with a little experience, and so the airboat could become a learning model figure chart. This boat great sailing qualities: it handles well, quickly leaves on glissirovanie, stable moves for all evolutions, sufficiently stable. Even with a strong gusty wind model but out of control.
“Eureka” is the Dinghy to the simplified construction, designed for home fabrication technology. The hull of the Dinghy — wooden, lightweight, with the lining membrane type. It consists of three bead frames, keel and four stringers. Midel-frame — reinforced, as it mounted mast and additional parts. The mast of the dural tube or wooden, swivel. The sail is a Latin, with a mainsail area of about 3.2 m2. Additional parts of plywood hinged in the dural tube, sealed at the midship frame.
We offer mini-farm is designed for breeding and keeping rabbits of all breeds both private and public farms. It is based on a two-cell module (if necessary, they may be few, Solitary common roof). Device farm and maintenance regime designed that allow you to use it even the breeders and Amateurs, who can take care of animals only once a week on weekends. With this periodicity are filled genome, roots or feed trough; no more and construye appliances with water heating. Slatted floor cages with funnel-shaped shafts pitched manure makes unnecessary constant under other conditions cleaning.
Avtomodelistov riders as it is not accepted to give the models names. Perhaps that is why the first thing we asked the author of this has no similar model, the origin of its name — “Vyatka”. Instead of a response, the designer withdrew from subtle glass-plastic fairing. It was very similar in layout to those produced many years of domestic scooter VP-150 Vyatka: console attached to the engine block the rear wheels, the engine — side of the longitudinal axis.
The bread baked in the village oven, needs no advertising: all articles del. Only here to store sacks of flour troublesome, much easier — the grain. And therefore, it is necessary to be able to grind grain at home without having to travel to mill. And get the flour as fine and coarse. At home in the village often have to roughing of grain, sunflower, tear down and to grind chalk, salt, various grain waste. And prepare feed on his farmstead — the dream of a villager: livestock and poultry in private households is increasing day by day.
Almost ten years ago bought a house with a plot of land in the village. The site must be processed, but without technology this work was daunting, and the money she had left. Here and was forced to build for these purposes, the tillers. Experience Amateur construction by that time I already had again, to travel to the village in the winter time made a “cane” snowmobile (remendously caterpillar). Tillers same though and have seen a lot (as industrial production and handmade), but he thereof built for the first time, so did many things as instinct. In the estimation of the tillers had become more a vehicle for the same trips and trucks and even all terrain, as part of the path to the village was a road which a road can be called only with great reserve.
Most often the chassis of modern highway car made of metal. In the case are tinplate, thin sheet duralumin and brass, steel wire. Requirements and the chassis is presented are many, and each new version is to some extent intended to satisfy them. Designs, at the same time perfect in all respects, have not yet been.
In the Soviet and foreign scientific and popular journals have repeatedly reported Nicoleta apparatus-ekranoplan, including the Soviet pilot the rescue boat amphibious ESKA-1. This car is Amateur-built successfully last cycle of flight tests, designed by Moscow engineers Gramatzki A., E. Grunin, S. Chernyavskaya, Y. Gorbenko and N. Ivanov. Flight tests were conducted by an engineer A. Gramatzki, and then the pilot Baluev A.. ESKA-1 was exhibited on one of the Central exhibitions NTTM was awarded a bronze medal VDNH USSR, and its creators — signs of the winners of the NTTM.