For repair and construction works often require different, up to large-sized lumber, the lumber purchase and delivery which sometimes is not easy. Everything is easier if you have (albeit not heavy duty) sawmill at home. Especially collapsible, not occupies in storage a lot of space. For example, I am very happy with my homemade sawmill. “Circular saw” fixed on the shaft 5-kilowatt electric motor, which is mounted on telefonnoi trolley, easy moving along steel guides. From existing analogues is my sawmill is characterized primarily in that is designed for a single employee, a pensioner.
SAWMILL HOME
Is it possible? It would seem that it is hard to imagine this sleek high-speed motorcycle as a truck. However, it perfectly copes with the role of the heavies, thanks to the reliable and durable engine with good fins, as well as ample torque throughout the range of rotation of the crankshaft. I must say that this is my “Java-350/634” sidecar “Velorex-562” operated for ten years. Mileage was about 60 000 km With a full load the bike confidently overcame long distances and on motorways and on dirt roads. The roads and highly rugged terrain was not an obstacle for him. Trouble-free service of the motorcycle in these conditions is a sufficient proof that under normal conditions, in addition to three riders, it is capable of transporting significant cargo. But where to place it? The load capacity of the carriages is limited by the magnitude of 105 kg, to install additional trunk it did not make sense. The logical conclusion is to make a cargo trailer.
The list of Moto – and electrophotonics that use rural residents, is growing steadily. Along with tractors, tillers, mills, kartoffelschalen, mower they have different fixtures, which they say: IU-lotovka, but the farm will fit. About such seemingly small, but undoubtedly useful devices in our factsheet.
Those who live near the water, the boat is as necessary as for other bike or car. Of course, experienced shipbuilders-fans are unlikely to descend to the boat, we want to bring to your attention, but for beginners shipbuilders design of this boat is what you need. It is simple, technological, besides allows on the basis of one case to build a row boat, and a sailboat.Before you start building housing on a large sheet of plywood it is necessary to draw Plaz — at least, to portray the theoretical section of the housing.
In the practice of the rally often faced with the necessity of soldering or welding. A few years ago I accidentally saw used for this purpose, benzopyrene production of the GDR, then had the idea to do the same, but running on gas. The result exceeded all expectations — and now gas-heated soldering iron is a decent place to set my tools. Exploitation it during body repairs, radiators, bits of copper cables with large cross sections confirmed the efficiency of the design. The main advantages before traditional “hammer” and a blowtorch are: the possibility of continuous soldering, the temperature setpoint, which is important when performing large volume of work, as well as the possibility of regulating the degree of heating.
Once television was a popular program “you can”, where the craftsmen talked about their designs. Perhaps it first appeared the information about the pneumatic-tired machines. A publication in the journal “modelist-Konstruktor” has prompted many enthusiasts, including our own, Angarskaya (mostly fishermen) to manufacture such machines with their own hands. Pneumatic bribed his external simplicity, which promises a good performance. 