A good helper when working with sheet material will be here is a simple fixture. It allows you to cut a sheet of chipboard, plywood at any angle.
Car owners contained under the open sky, spring snowfalls bring a lot of trouble: wet snow by morning, so corsets that not everyone can handle scraper formed on the hood and the glass present. But it is necessary to cover the car with plastic film used for greenhouses, and the problems will disappear along with Read more…
This screwdriver can be used to tighten the screw in the most difficult and hard to reach places without fear of dropping it — Spitz sits on the tip of the tool like glue. The secret is simple: I drilled a hole from the handle and put in the magnet. A. ORLOV, Dmitry Revyakin, Read more…
How in the large or small basins, so they are all occupying the limited space of the bathroom. Three hook driven into the wall above the bath, will solve the problem — they will serve as a bracket for placing the basin at the top. And the third, middle hook, not too much: if you Read more…
If in the manufacture of furniture or other structures needed to drill a large number of holes of the same strictly defined depth — make for drill shown in figure limiter. This may be the right size wood “the block a little”. So he not slipped on the tool during operation, run in this hole Read more…
Outdated, the dish rack can still come in handy. If you cut the upper part, and the sidewall close decorative plastic, you get easy and convenient storage for records. G. LATUSH, Leninsk
Clothespin is adapted for hanging on a rope or wire. If adapt it for suspension, say on a nail — there would be a more versatile clip. It turns out to do just that. Enter into the hole of the spring ring pendant is ready!
Usually on the surface all the time without a case of paint forms a film or crust when you remove which are often particles: once on the brush, they can ruin all the work. Take the time to look for an opportunity to drain the contents of the can. Easier to cover it with a Read more…
To the wind blew locks window frame, extend it by another device consisting of two metal bars with holes. Fasten one on the window frame and the second frame. In the last hole you need to cut the thread corresponding to the screw which is passed through the first bar. Tightening the bandage, we securely Read more…
