Advice

Modernizing the conventional electric soldering iron, can safely be taken for soldering aluminum products, And the quality of the weld and the process practically does not differ from traditional. Finalizing undergoes only the copper core of the soldering iron. His working part should be dulled with a file before the formation of the pad width Read more…

Razmeshalsya the edge of the brush with the bristles protruding or too sharp end of the teeth of the combs can be easily aligned with the flame of a burning candle.

The traditional method of cutting Styrofoam with a heated nichrome filament is not always easy. The size of the holder of the strings, limit the size of the workpiece. Offer (in addition to the device with nichrome filament) to work with large sheets of foam to use electric soldering iron with a power of 40-50 Read more…

If your glasses plastic frame weakened and became ill hold, press the sticky side of a piece of tape to the end of arch or its supporting platform on the frame, and protruding edges are carefully cut with a razor blade. The liner will be invisible, and the elasticity wearing glasses restored. Duct tape can Read more…

It happens that brand new, just bought at the store needles for sewing machines cut the thread. This occurs due to the sharp edges of the eyelet. To whittle away the edges of the conventional or diamond needle files is impossible, and using the very same threads, grated pasta GOI, presents no difficulties. This is Read more…

When facing a bathroom or kitchen tile inevitably arises the problem of its cutting. From my own experience I know that the novice master will be able to successfully cut not the capricious bopee five squares of ten — the rest will go to the marriage. Agata will not happen if the tile to be Read more…

As a rule, bathroom accessories: soap, washcloths, shampoo, etc., on the bathroom wall strengthen special shelf. Made of wooden bars of circular cross section such a simple design, which can be put on the edge of the bath, you will get rid of the difficulties associated with drilling holes in the wall.

Make the owner decided to upgrade Drapes or curtains and hem the edges of the new panels, here’s a gift: fold out metal school lines some kind of clothespins. They will bring and will keep the bent edges and the dividing lines will show the same distance of roll tissue.

When you need to pour the liquid in a bottle with a narrow neck, you always use the old reliable and proven method: inserted into the hole daddy or thin wire of a suitable diameter so as not to touch the walls. The liquid in this “vortex” flows gently and smoothly.   Y. BOGOYAVLENSKIY, Kazan