Advice

In improvised furniture experience the greatest difficulties when sealing the ends, especially chipboard. I hang the ends of the veneer. On cut to size a strip of veneer put in a thin layer of PVA glue and giving it a little dry, apply a strip of detail. Then slowly iron the veneer with a hot Read more…

It is easy and convenient to clean the floor in the Studio or room with any ordinary MOP, the “dressed” Terry cloth Velcro.

Everyone had to solder, know how much trouble is due to the fact to hold the workpiece in position. Much easier to work with if you make a simple vise, consisting of several pegs mounted on a wooden bar.

In the manufacture of hull racks for back walls typically use fibreboard sheets (MDF, or, as they are frequently called, – hardboard). For transportation of wide sheets are cut, providing the kit for subsequent docking of the special H-shaped plastic profiles. But the edges of the sheets of them during installation constantly popping up. Pomaia Read more…

If you have stopped shrinking tape-fasteners-zippers on a garment or a bag, don’t hurry to the shop to change it – but this work is more expensive of a product. Apparently, all problems – in the castle: erased or dispersed back part of his upper and lower cheeks or side walls. Try narrow pliers (or Read more…

To from a larger container to pour the liquid down with a narrow neck, usually use a funnel. But the trouble Nastya to work with it requires another pair of hands to maintain it. And sometimes, after all, to imitate her. Then take some plastic material — any, from clay to clay or putty — Read more…

It is known that the easiest and most reliable method of connecting pipes with flexible hoses, with clamps, However, to find the latest is not always possible, and to do it with my hands from strips of metal very easily which is evident from the figure.

If you Unscrew an ordinary safety razor, you can use separately as the loom and the blade. Fix machine cut abrasive sandpaper is my best and you will get a convenient tool for grinding of small parts made of metal, wood or plastic. Blade, or two blades will need for making another tool, which is Read more…