Another use of old tires in the suburban area recommends that the Bulgarian magazine “Put yourself” as “Parking” of bicycles near the house.
There are restless people, they are literally turning on the seats, even when doing serious work. Why not meet them and not make the chair so that he could turn?
It often happens that a brand new, recently purchased, pasatizhi, pliers, wire cutters, etc. can neither open nor close. The easiest way to prepare the instrument for operation with abrasive powder (waste ocilogon stone, fine sand, etc.) For this these pliers it is necessary to moisten and sprinkle with abrasive. Twenty to thirty movements and Read more…
Experienced motorists know that most of the canisters becomes defective, usually due to rubbing of corners and bottom of the pavement or during transport in the “Laden”. To exclude this undesirable phenomenon, I propose to gird capacity two rubber rings scraps of the old hose. Joints are made with wire.
Strong, with well-developed brush hand can easily cope with the physical work, and with a hockey stick, tennis racket, paddle.
To pull the oars will be much easier if you install in a boat footrest. It consists of two shaped holders and crossbar. As the crossbar, you can use the cut water pipe.
For cooling microelectrodes rotating propeller for flying model aircraft, usually set just before small anchor impeller. It blows air through the casing of the motor. The most intensively blown by the front part of the winding and a set of anchors.
Sometimes in fishing there is a need to put the bait, take the bait, Sneath from the fire pot with the finished soup, and the hand is not even an ordinary slingshot. To get rid of this inconvenience, equip a fishing rod two folding legs, which in the transport position, is pressed against the rod Read more…
Members involved in automodelismo, sometimes have great difficulty when I need to make wheels for model kits of cars, rollers for tanks and tractors. At our station of young technicians of the Sverdlovsk district of Irkutsk city developed not too complicated production technology of any wheels with a fairly high degree of copy number.
The command “Start!” and mixed performance on the race ahead on the highway. Very long lasting-in — 2-3 minutes, but during this time, the miniature machine will take hundreds of turns, each time changing the speed. You have to drastically drop it to moderate before the turn, and then give “full gas” at the straight portion.