Despite the fact that the industry offers an increasing selection of bread bins, they are still rarely meet the requirement of vowel — good preservation of bread: he is in them or quickly get stale or moldy. More reliable in this respect, structures of wood, especially because they are readily available for self-production.
Offer to improve a closure for closing window frames: it a metal plate with a slot for fixing the “tongue” needs to be set obliquely, as shown in the figure. Now, if zakryvanii frame in the direction indicated by the arrow, the tighter she will be attracted to the school, and your apartment will get Read more…
After reading in the “M-K” No. 2, 1988 on “the guillotine” for trimming the binded books, I decided to share my experience. Moreover, they issued the fixture due to design complexity not available to everyone to review, and it is not very convenient, since the author complains about the duration of the process. But it costs not on the device and that the principle of movement of the knife vertically.
The pressure from the collet pencil, put on the shank of a suitable diameter drill bit, turning it into the simplest depth gauge required for control when performing nescopeck, equal to the depth of the holes.
In many circles of modeling, there is a shortage of good compression motors a working volume of 2.5 cm3. The only satisfactory engine KMD-2,5 for the last time so decreased that the head is forced to look for ways of providing the club good motors.
The fabric covering of aircraft during the second world war, good to simulate on the models-copies in the following way. Not yet primed with white enamel model according to the drawing axis and spaced edges protruding rigid elements (ribs, stringers, edges, edge of junction of the hard covering with canvas, etc.). Then on the markup pasted edges of the copper wire Ø 0,15—0,25 mm.
In the practice of the house master often there are cases associated with loosening or tightening of screws of large diameter. Without the “powerful” screwdriver not to do. Equip her with a pen, as shown and work with it will be much easier.
Sink can be made of ordinary plastic cans of 5 litres and curved, as shown in the figure, a metal tube. Tightness is ensured by a gasket made of thick rubber, is placed in the tube. The loss of water, debris and insects are excluded. Useful this design both for tourists and motorists, and owners Read more…
The aesthetics of the interior of the home depends not only on furniture and carpets, curtains and colors of the Wallpaper. Sometimes a small protruding detail of building structures or heating appliances and chimneys cause more damage to beauty than a lab table or wardrobe, which can be replaced more graceful. And what about the bulky radiator Central heating? After all, their is no substitute for lighter and more modern. The solution is simple — hide. About how to do this, we introduce readers in today’s issue of “Club home of the masters”.
If the past winter has shown that you have carried out the insulation of the apartments (caulking Windows and gluing them to a paper tape) were insufficient, make sure that the following the cold season cold air didn’t blow precious heat.