The proposed design (it can be called a two-storey stool, stool-ladder) is very practical, simple to manufacture and may find use in the summer house and in the apartment.
THAN CLOSE THE GAP?
Often in the kitchen between a Desk and a sink or gas stove remain gaps. They fall poki matches, pot holders, fall into the water and garbage. In short they bring some inconvenience. To get the same from them, you can use scraps of dural profiles, often sold in stores “DIY” or remaining when fitting Read more…
In the journal “modelist-Konstruktor” has repeatedly published materials on the makeshift “fridges” where to store your products use natural cold which in the middle zone of our country, not to mention its North, more than enough. In all of these devices when too much frost, the optimum temperature is maintained by heating the food. The sensors used for this are very different, but for some reason, nobody comes to use the effect of phase transformation. In short, a physical phenomenon accompanying the freezing and melting of water.
For harvesting for the future fruit for several years, use convenient dryer of our own making. Frame design and vertical placement allows you to place it on the Sunny wall of the garden shed without taking up additional space on the site.
Wood sheathing. Such way of furnish of walls in recent years is becoming more common. The most preferred veneer tongue-and-groove boards. On brick or concrete walls, they are normally attached to the wooden planks. The most appropriate the cross-bar 25X40 mm. to Mount them to the walls of the most reliable with the help of plastic dowels and screws. Particular care should be fixed to support bars in the areas of the corners of the walls. The distance between the bars depends on the thickness of boards: plating thickness 10 mm are typically used to cover walls for supporting bars, spaced at 400-600 mm. Sheathing of boards of greater thickness (12 mm) recommended for surfaces separate elements and must be sufficiently rigid when the distance between the supporting bars of 500-600 mm.