On a circular Pipa can not only dissolve a wooden Board in straight lines, but cut discs of any diameter from sheet material. For this you need only do a simple device-a plywood plate, which is attached to the axis of the future drive. The axle is made of screw, a screw or even a Read more…
Typically, the wood for the stove or fireplace are the arms, which is not always convenient and pleasant. Manufacture on the case of a special tray. Take a sheet of roofing iron, preferably galvanized, of a thickness of 0.5 mm. slightly longer in length your wood, and a width of 300-400 mm. Fold back the Read more…
If it took a long screw thread M2—M6, and they are not (by the way, is not easy to find and sold out), it is easy to produce such a nail of suitable diameter, cut into the rod thread and propilov in the hat slot. I. GLUKHOV, Saransk, Mordovia
If you need something to compress (e.g., warped cardboard blanks or the restored block of the book), do not have to have in the home press will always be at hand something spring loaded: hangers for trousers, bras with a pin and the like, that will help you out in such situation. According to Read more…
All good new baths, stamped from sheet steel. But because of its light weight, unlike traditional cast iron, they are very fragile. This deficiency could be corrected by securing the tub with a clamp from the metal bracket and screw with a head under the key. A few of these clips bath drawn for her Read more…
Often a rigid wire or, conversely, a soft rod or a thin pipe required to give the necessary bending of a specific shape and size. Often try to do it in a Vice or just pliers that threatens to ruin the material. The same thing, but without injury, and much faster (especially if you want Read more…
There is nothing easier operation with a claw hammer. However, it is desirable to have a nail not to bend, pulling. Especially if it is longer than 60 mm. Usually put under the nailing plates of different thickness or that arm will fall. Make a bar of wood stand in the form of a ladder Read more…
However, this may not be necessarily a glove, but a mitten. The main thing, of being somehow attached to a Shoe or clothing brush (e.g., nailed or glued), the glove will not allow the brush to slip out of hands during operation. This is especially useful for those people who have injured or missing fingers. Read more…
When processing a file soft and ductile materials cut quickly becomes clogged with sawdust. Cleaning the same tool is often more time consuming than the workflow itself. That it was a dispute before the grate in the notch of the file with chalk and sawdust are not in it to get stuck. I. GLUKHOV, G. Read more…
When sawing any, but in particular plastic pipes (due to its “softness”) to withstand the cutting line is exactly perpendicular to the axis (or if necessary – on the contrary, under the right angle) will help the duct tape. Wound appropriately a ring from it will not allow the cutter to get off.
