DIAMETER IN THE GRIP

Sometimes the drills, especially in the already served, without distinction, the marking indicating the diameter. It would seem that to define it is only possible with a micrometer. But here’s a simple and fairly accurate method of measurement with… grip. Drill clamped in their jaws, and remaining between them a gap corresponding to the diameter Read more…

DRILL CLEAN!

DRILL CLEAN!Someone had to drill holes in the ceiling, he knows, as a way to work from the dust and concrete crumbs. Ways to protect the face exist. One of them use dust cups — often plastic caps from aerosols. However, such improvised traps are ineffective: a glass, put on the drill bit rotates with the same peripheral speed and scatters, like a centrifuge, something that needs to collect.

Read more

NO BUTTONS, NO SWITCHES

NO BUTTONS, NO SWITCHESThe proposed indicator allows you to capture voltage of 6 — 12V (i.e., below the ignition of the neon lamp) and above. In contrast to the known similar kind of indicators, there are no buttons and limit switches measured values, which a wrong selection can lead to distortion of information, and even to failure of the device.

Read more

RESCUE ROPE

There are situations when an urgent need to move light but large-size material: chipboard, sheet glass, hardboard or plywood, and at this time there. In this case, the rescue of suitable length cut “endless” rope (with tied ends). The sheet material should be placed on the longest edge and under the edges to make a Read more…