Advice

PI is required to move large sheets of plywood or hardboard, and the door of the greenhouse, or glassed-in frames — it is always difficult: the load is not so heavy but bulky and uncomfortable, not immediately figure out how to take it. Very easier task 1ростое fixture; it consists of a wooden grip in Read more…

Whatever the hacksaw is blunt or sharp, it is difficult to maintain the required cutting depth. However, a small adjustment will make the tool very accurate. Enough to install the line-stop, wood or metal — the main thing that it was transverse slots or lugs under the locking bolts, passed through specifically done in nozovka Read more…

The need to effectively mix anything occurs not only in cooking, but, for example, in the preparation of two-component parquet lacquer, complex color paint, or epoxy glue. Thus it is necessary to withstand the hard condition in the resulting mass should not be bubbles, since they’re hard to get rid of. All these requirements will Read more…

To hang curtains, painting, shelf on a wall is not easy. Help out PVA glue or epoxy that can glue the mounting hooks and brackets for non-severe items. For the rest it is necessary to make holes with a drill or a carbide punch and the screws will hold the usual stationery (liquid glass) adhesive; Read more…

Before you drill cylindrical in shape, its surface need to procure under the drill “the hole” — to stake. But not so easy to set the core to such detail. Helps may this simple device, consisting” of two halves: the bottom serves as bed for the most part, and on top of the guide pins Read more…

If there is an urgent need to punch a hole in the tree, but you don’t have suitable drill, you can make… of the nail. Asclepia it on the end as shown in the drawing, and sharpen edges with a file. Such a tool will take any type of wood.   DUDCHUK, S. V. kleschikha, Read more…

The quality of processing lumber a plane largely depends on the sharpness of the blade of the knife (or as it is called, is the glands). And because sharpened part is always from the body of the plane, when storing it is easy to damage. To protect the blade, it is possible to close the Read more…

Like in the “bullseye” target, to get to the center of the end face of the cylindrical body of rotation help simple tool, consisting of only two parts. They can make plastic, metal or solid wood. Made in one rectangular cutout, and the other is a line imposed on the first item on the bisector Read more…

In one of the sets of tips (see “M-K” No. 2, 1983) I was drawn to the shelf of cans. The fact that I have two years successfully used similar stacked “piggy Bank” for storing small parts and fasteners. Collected it also from neatly opened cans, but with spacers from wooden spools from under the Read more…