In the journal “modelist-Konstruktor” No. 3 for 2006 C. A. Kotov shared with the readers the experience in the manufacture in a home workshop metal using scrap materials, in particular, one of his options was made on the basis of the hockey stick. Developing this theme, the author offers a new development.DEEP METAL DETECTOR
In the journal “modelist-Konstruktor” No. 3 for 2006 C. A. Kotov shared with the readers the experience in the manufacture in a home workshop metal using scrap materials, in particular, one of his options was made on the basis of the hockey stick. Developing this theme, the author offers a new development.

To build templates of the screw (side view) for a given shape of the blade (top view) and the step there are two main methods of calculation: analytical and graphical. Usually based on the following characteristics: diameter, the relative width of the blade and step. Since the amount of slip is difficult to consider in advance, based on the geometric pitch.







Athletes, acting in competition with rezinomotornaya models it is well known the importance of precise trouble-free operation of the stopping device of the nasal boss. Therefore, the appearance of any new construction is of great interest to modelers.