Round tables are in fashion: buying new furniture, they are often sent to a landfill. However, this is hardly justified. To verify this, just look at the figure — four boards plus round table top from old furniture — that’s all the details of the original coffee table, which perfectly fit to the modern interior.
If the steel bar drill a hole the same shape of the desired rivet, its manufacture takes only a few seconds, two or three blows with a hammer to cut aluminum wire inserted in the hole, and the rivet is ready. So it is convenient to extract out of shape, drill the bottom bar one Read more…
Loves to embroider or cross stitch is used for the tensioning of the fabric an ingenious device — the Hoop: two wooden or plastic rings, one of which together with the tissue fits snugly into another, keeping the material taut. If tissue is to take a rare mesh of thin wire, or specially navit small Read more…
A good assistant hostesses will be crashcatcher for cans with screw locking. To make it simple: two bars must be screwed pieces of steel channel, and one of them should be wearing rubber hose. Both blanks fastened to a plate which is fixed on the lower side of a hanging cupboard.
It happens that the nut-“lamb” cannot be unscrewed by hand. Will come with original key from the segment of steel pipe with diametrical cuts.
A fluid or oil is supplied to market in plastic canisters of different capacities. A worn or leaky thrown into the garbage. However, one can do some useful things — for example, podtsvetochniki or scoop, similar to what is shown in the figure.
Ordinary clothespins modelers often use as clips when working with small parts. Of the two wood you can collect even more powerful for such a clamp: it is used, as shown in the figure, additionally the tail of the second pins and its spring.
We are accustomed to the fact that the curtains should be spread out. For this there are special rods or strings, fastened above the window. Some of them are mechanized: it is necessary to pull the cord and the curtain goes to the side. It is convenient to use the same device and for lifting Read more…
A good master always holds his instrument clean. Thoroughly washed with cushion will give a uniform coating of the painted plane, and that it is not collecting dust during storage, manufacture for him the simplest case of trimming an aluminum or plastic tube.
When performing masonry great aesthetic importance is the jointing. Use to perform this operation cut tube Ø 10— 12 mm by bending it as shown in the figure.
