Approach the stairs with a bunch of tool in the hand — no problem. And here is how to work with them at the top: you never know what you might need — screwdriver, pliers, side cutters. There is help out an ordinary tin can. Bend a hook cover for suspension on a ladder crossbar Read more…
the Owners of the most different techniques faced with a secret or castellated nuts. You can make a master key from an ordinary pair of pliers. For this purpose, the ends of the handles of the drilled holes and press-fitted steel pins there (you can use the shell drill 4 mm). Such upgraded pliers like Read more…
Short age pushpin! Careless movement or too rigid Board and the button breaks or bends. There are many various designs of holders for posters and maps — from the simplest (e.g., dozens privernutyh to the wall with clothes pegs) to quite complex. Recommend one method of fixation. This will require a steel strip with a Read more…
A good helper when working with sheet material will be here is a simple fixture. It allows you to cut a sheet of chipboard, plywood at any angle.
Car owners contained under the open sky, spring snowfalls bring a lot of trouble: wet snow by morning, so corsets that not everyone can handle scraper formed on the hood and the glass present. But it is necessary to cover the car with plastic film used for greenhouses, and the problems will disappear along with Read more…
This screwdriver can be used to tighten the screw in the most difficult and hard to reach places without fear of dropping it — Spitz sits on the tip of the tool like glue. The secret is simple: I drilled a hole from the handle and put in the magnet. A. ORLOV, Dmitry Revyakin, Read more…
How in the large or small basins, so they are all occupying the limited space of the bathroom. Three hook driven into the wall above the bath, will solve the problem — they will serve as a bracket for placing the basin at the top. And the third, middle hook, not too much: if you Read more…
If in the manufacture of furniture or other structures needed to drill a large number of holes of the same strictly defined depth — make for drill shown in figure limiter. This may be the right size wood “the block a little”. So he not slipped on the tool during operation, run in this hole Read more…
Outdated, the dish rack can still come in handy. If you cut the upper part, and the sidewall close decorative plastic, you get easy and convenient storage for records. G. LATUSH, Leninsk
