In Amateur practice when developing or building a device often require multiple power sources at different voltages. For example, structures made in operational amplifiers and working in conjunction with digital integrated circuits require the bipolar and unipolar current sources. To use in such cases, the voltage divider is uncomfortable, especially in the process of developing new devices. After all, it is necessary to change the number of elements used and their type, which leads to a change of energy parameters of the device, and hence to necessity of the divider.
Read more
Any motorist knows that the state of charge of the battery must constantly monitor is required to control the pressure on it. This can be done by using electronic circuit which gives an alarm when low electrolyte level, high overload, contamination of the terminals of the battery, breakage of the drive belt of the generator, the overcharge of the battery.
E-the guard mounted on the car “Lada”, emits intermittent alarm signals if someone opens the door, hood or trunk of a car.
In the staff room phone rang: asked physics teachers. Some of those present said: “Now it’s in the shop”. How to be? Because the school has no internal telephone communication and without the “intentional” here, perhaps, is not enough.
Today, phone operators, representing a population of mobile communication services, even in remote regions have made their rates available to most consumers. Constantly updated market of mobile telephones (AIT) allowed to acquire outdated but workable model for a symbolic price. Given this, anyone who is familiar with the basics of electrical engineering are given the opportunity to make the mobile phone almost free, automatic Secretary, who will notify the owner about the state of its protected values; whether it be apartment, a country house, safe, car or access to a personal computer. Now cellular telephone connected by the following method with a sensor that will automatically inform the owner about the condition of the protected property, wherever that may be. This is my article.
Kit electronic Christmas decorations from four independent devices developed and produced by the student of 9th class member directorship radio children’s Palace of creativity from the city of Saransk Alexei Pichushkin. On the urban exhibition of technical creativity in 2004 with these decorations won first place.
In many technical constructions, devices, in laboratory and bench equipment, automobiles used a DC electrical supply voltage of 12 V overload protection, which can lead to spontaneous combustion, is a very important task.
On the radar heard many. The transmitter sends powerful electromagnetic wave in the direction of a moving object (airplane, ship). Upon reaching it, the wave is reflected and received by receiver. Time delay of the sent signal to determine the distance to a plane or a ship and its speed.
Every radio Amateur knows how it is sometimes difficult to find in electronic equipment, faulty transistor, especially when there is no instrumentation. From the diagram it is necessary to use almost all transistors until you find the “culprit” of the failure. I tried to test the transistor directly into the circuit, not Vipava it.
In technical literature there are many publications on improvised electronic code locks — variety of complexity and management that is performed on chips as small and medium scale integration and microcontrollers. Unfortunately, most of the first it is impossible to quickly change the code, since it is necessary to solder a jumper, or make other changes to the installation. In others, although provides for reprogramming of the microcontroller, but a very limited number of times. Furthermore, these modifiable combination locks consume in standby current of approximately 1 mA, which makes pay attention to the selection of source of energy when you use the above devices in both local (field) conditions where it is impossible to use network adapters.