Modern small apartment is not always possible to place it with all the furniture that you feel necessary. Here, say, chess table — the place is quite a lot, is used relatively rarely. If you make it in our drawing, the “one shot kill two hares”: to create a “chess area” and a dressing table.
For those who have a family has small children, especially those under the age of fifteen years do not need to explain how they are curious in the knowledge of their surrounding environment. And this sometimes leads to their getting abrasions, cuts, which should impose povyazochki with medication or tampons with ointment. But the wound hurt, itch, bandage prevent — and the little man tries to tear them or remove. Well, how to explain to him that you cannot do it! So sometimes you have to take quite radical measures, up to the hospital, where the child’s hands tied to the bed.
We usually dig? Pushing leg, bury the shovel, then bend down, take the lower part of the handle, raise the shovel from the ground and turned a seam, having unbent, then re-bury and bend the cycle of movements is repeated quickly start aching hands and back.
A good host never gave up his horse under the open sky: proskakal, carefully covered him, flushed, with a blanket, fed-fed and wound up in the stables to rest. The same respect is preserved to the car: as a rule, even at their summer cottage built for him “stable”. Only the bike remains without its premises — in the best case awarded film “blankets” for shelter from the weather.
It would seem, from all furniture designs are the most simple — it’s a shelf. As a rule, it is a narrow bar of suitable material such as wood, metal or glass, based on any basis or appropriately fixed on the wall. However, the regiment executed without the required margin of safety and incorrectly mounted or suspended, face unpleasant surprises at the most unexpected point of operation: that somehow bent, then broke, all broke or fell. What is the secret of such a simple design? Consider some of them.
Very often for finishing wood products use burning. Even if this operation is performed by a special device — cautery, it is very time consuming, especially when applied to a variety of complex patterns. I want to offer successfully tried mechanized method of burning intricate patterns and various applications. It is much more productive than the traditional method and besides, it was pretty spectacular.
Not only the shipbuilders there is a need for one-time, single steel casting of certain parts. In these cases, existing technology has to pre-make a wooden model to receive the outdoor imprint in the mold and core boxes for the formation of internal cavities of the casting. The complexity of manufacturing of model kits three to five times higher than the complexity of manufacturing of the castings.
The working head of the machine, snake obviouses his bracket around the pipe, produces a hissing blue tongue of flame. Licking the metal, as if it bites into him and now burns through, slowly slitting thick wall pipe.
Modern mansions of wall solid concrete or stone deaf fences, and the usual plots, usually surrounded by a light net or stamenkovi fences.
His appearance in the editorial was met with a, frankly, no enthusiasm; preliminary telephone conversation were no signs, it seemed, nothing sverhinteresnogo. Homemade paper? Well, someone today, they will be able to inspire! It’s long passed stage — paper model…