Good recommendations

Work with pliers, side cutters or other similar tools will be significantly easier if the plastic knob to insert a spring made of cut steel wire with a length of about 150 mm.

What if you need to draw a circle, and a compass at hand is not! To get out of this situation by making a simple compass of the bent and strapped to the pencil in the right place for a stylus pen, as shown in the figure.  

Old saw blade for metal can still be of use if, instead ground off the teeth to make a sanding disc edge. This painting, like a plane, it is convenient to process parts made of wood and foam.

Regular floor brush is equipped with a handle, can turn into a handy tool for smoothing and pasting the Wallpaper or coating them with glue.

If the posters or wall Newspapers transferable adhesive you use fonts, for of application, use a homemade tool — a common pin with head ball stuck in the end of a pencil.  

Old children’s ball cut in half and put on garden shears, protects hands when cutting thorny plants.  

Furniture, decorated with different shaped pads, looks nice. But to run any profile requires a special tool. The simplest may be a conventional steel tube with a razor-sharp edge. If slightly change its shape and the profile being processed will have a different look.  

Confident fill the tank with a narrow neck to the desired level (for example, an automotive canister), if you equip the funnel with a special gauge. For its production will need a wire needle with a diameter of 1 mm, cork or foam float and a tin strip into the guide hole.