Skip to content

DIY | HOBBY | DESIGN

Search
  • DIY
    • Country house
    • Own hands
    • Our workshop
    • From paper
  • Advice
    • Good recommendations
    • Tips readers
    • Tourist tips
  • Ham radio
    • Himself an electrician
    • Devices helpers
    • Radio model
  • Collection
    • Armor
    • Marine
    • Aviation
    • Auto show
  • Public Design Bureau
    • Auto Moto Service
    • World of models
    • Small-scale mechanization
    • Design
  • Search

Good recommendations

A BELT — DUCT TAPE

10.06.201813.05.2018Categories Good recommendations

Broken drive belt for electric planer can be replaced with electrical tape on a fabric basis, tightly winding it on the pulleys of the motor and the drum with knives, as shown in the figure. The free ends of the tape must be secured with a few stitches of thread. Operation for several months showed Read more…

Leave a comment

DRINKER FOR TREES

10.06.201813.05.2018Categories Good recommendations

Gardeners know that during a dry summer, the harvest and its quality is directly proportional to the hard work of the owner and the amount of water that he will provide for their Pets. To facilitate watering, reducing the amount of water, it is possible to give life-giving water directly to the plant roots. To Read more…

Leave a comment

LIKE CLOCKWORK

10.06.201813.05.2018Categories Good recommendations

For clamping the tape of the compact cassette to the tape recorder head is jumped out of the spring with the felt used a foam “cube”. And I do so. But to reduce friction tape on the foam — glued on the “cube” sticky tape (Scotch tape).   O. I, Voronezh

Leave a comment

GEAR -SAW…

09.06.201813.05.2018Categories Good recommendations

Somehow I had the need to cut a thin sheet of plastic. Due to its large size, use the hacksaw was impossible, but to cut just the canvas for a long time, and breaks it in his hands. Rescued normal gear from the children’s designer “Young watchmaker.” Opav the first of its axis and sharpened Read more…

Leave a comment

SYRINGE FOR… PRINTED CIRCUIT BOARDS

09.06.201813.05.2018Categories Good recommendations

I want to share my method of drawing on the PCB. Take a disposable syringe. After removing the needle, its internal cavity is filled with colored lacquer. And vypusnogo hole with little effort insert the burner Assembly from the rod of a ballpoint pen with the previously removed ball. Slowly pushing the plunger of the Read more…

Leave a comment

THE SAW WILL NOT PINCH

09.06.201813.05.2018Categories Good recommendations

The saw will pinch, if you make a simple device: a wooden plate with a nail, a section of which number is greater than the thickness of a handsaw. If to promote it as cutting — nogova will cut freely without clips.

Leave a comment

A RESISTOR IN THE LAMP

09.06.201813.05.2018Categories Good recommendations

Do you have old dual variable resistor (e.g., type SP-P to the same flawed)? Do not rush to throw it away. It is, in fact, the ideal mounting site for homemade sconces, floor lamps, table lamps, chandeliers of various designs. Sleeve 1 (see Fig.) is perfectly suited, it turns out, when installing the cartridge in Read more…

Leave a comment

BICYCLE FLASHLIGHT FROM FLASHLIGHT

09.06.201813.05.2018Categories Good recommendations

It often happens that a long time lying with the old batteries of the flashlight is being eroded nor the CCP so that at least throw it out. Take the time to do it: his surviving front section can easily turn into a cycle headlight is enough to cut it with a hacksaw and attach Read more…

Leave a comment

EASILY AND SILENTLY

09.06.201813.05.2018Categories Good recommendations

To facilitate the movement of hooks for hanging curtains on the dural rail-ledge, offer to replace the metal calesini on the plastic, cut from a tube of suitable diameter. M. ASHKIN

Leave a comment

THE “ENDLESS” SPRING

09.06.201813.05.2018Categories Good recommendations

Performing of graphic works significantly faster if you add a spring reservoir for ink. Make it from medical pipette, attach it to the handle of the instrument with metal braces. So as not to crush the glass under the clamp should enclose a rubber gasket. At the end of the dropper is pushed tightly plastic Read more…

Leave a comment
Post navigation
Older posts
Newer posts
← Previous1…128129130…191Next →

SUBSCRIBE

MODEL CONSTRUCTION

  • ABOUT
  • PARTNERS
  • YOUR STORY

SUBSCRIBE

RECENT POSTS

  • Apples instead of… laundry
  • Brake light controller
  • “Sawhorse” in the garden
MODEL CONSTRUCTION © 2026
Scroll back to top