BOARD INVISIBLE

WALL OF INVISIBILITYThey are large and small, foldable and “monolithic”, table and floor — the different designs, but with one common shortcoming: require space for storage. We are talking about Ironing boards. Indeed, so necessary for each family household goods, and such an archaic, “clumsy”! where to clean it up when all the sheets are in order? However, came to light and the modern Ironing devices going, so to speak, in pace with the times scientific and technological progress: electric units in which instead of heating the iron bar, and the role the Board performs a cylindrical roller. But this construction is even more difficult to attach in the apartment so that it had not violated the interior.

Read more

HELICOPTER “BUTTERFLY”

Well-made screw — the key to a successful flight “butterflies”. Pick up the wood, without the ROE and knots. Billet screw vystrugat in the form of a rectangular bar size 160х8х10 mm. In the center of the puncture hole for the axis. Then make a paper template of one of the propeller blades. Aligning the centers of the template and of the bar, move the contours of the blade first on one half of the bar, and then another. Billet astrogate a knife strictly on the contour, do the same with a lateral projection. Holding the billet in his left hand, on the opposite half cut the right corners. When finishing, try to front (top) part of the blade was slightly convex and the lower flat or even slightly concave.

Read more

YARD “DRYER” FOR CLOTHES

YARD Any owner confirms that the washing out, dried on the street, gets the smell of freshness, not an example of this, when moisture from the Laundry evaporated in a special apparatus (devices) or simply indoors. Many times this smell is enhanced by weathering of underwear in the cold, and especially when freezing.

Read more

SKLODOWSKI-CLAMSHELL

SKLODOWSKI-CLAMSHELLNot so long ago a Swedish doctor-hygienist B. Akerblom wrote the book on… of furniture, more precisely, about the simplest of its species on the chair. “Five thousand years of sitting incorrectly!” he argues, based on numerous anthropological and anatomical data. His insights not only interesting and practical recommendations for professionals. They indicate that the furniture is still little developed, and therefore, extremely exciting field of technical creativity.

Read more

WITH NEEDLE AND RESIN

NEEDLE AND RESIN“Sunwski” — small boats that make the guys on “Pioneers yard” of the city of Astrakhan on well-proven technology. The main principle consists in wrapping the frame with fiberglass impregnating epoxy resin, which, solidification, forms a strong shell. By itself, it is of course, Nenov. However, it has features, which allows to significantly simplify the construction.

Read more

COVER FOR MAT

COVER PADJust note – it’s not my idea, I offer only the version of her performance. Came across this idea in some military magazine. The conversation was about the Mat-foam: “…However, such floor mats require an external case. This allows you to transport them on the outer attachment points of the container, and also sits on the folded Mat, placing one directly into the earth and Maraya him. In addition, folding the Mat, you can sew two longitudinal and three transverse strips, ending the loops at each end. This will allow you to use the product as a stretcher by inserting two trailing poles; and as a bed by inserting the two extreme cross-section of the pole and setting the Mat on four points of support (at the intersection of the poles)”. Everything is very clear.

Read more

STAND FOR DRILL

STAND FOR DRILLIf the drill breaks in the work is placed on the table or on the floor, I don’t like, but still tolerable. But if on the ground, but still raw? So I had the idea to make a stand-“the suitcase”, which would be convenient to put and take out a drill with an inserted drill bit and to transfer it separately or in a bag.

Read more

SUGGESTED FANTASY

PROMPTED FANTASYMetal caps with crimped edges from the bottles of mineral water, juices and soft drinks, cans, cuts the wires — all this “junk” material in the hands of Michael G. Pavlova, a pensioner from the Moscow region city of Lyubertsy, transformed into funny animals, of the warlike knights, and many other original Souvenirs. It turns out that to make such figures, great wisdom is not necessary. You only need to be able to solder, use simple tools and simple tools, the rest depends on the imagination of the master.

Read more