Each year, digging up kitchen with family land on the plot where the tractor was simply not to turn, thought: “I Need a walk-behind tractor-tiller”. Of course, you can deny something else, by such a mechanism. But, Thinking about what it will be used only a few days a year, this option was considered unprofitable and, therefore, unacceptable. And then decided to make a walk — behind myself!MEASURE PIN
To measure the thickness or diameter of small fasteners do not have to have a caliper: rescue improvised version of conventional clothespins. It is sufficient to attach the metal plate coated with graduations as shown in the figure. I. KORENEV, Korolev, Moscow region
The car’s handling and tyre wear, as we know, primarily depends on the state of the front suspension of corners of a longitudinal inclination of axes of rotation, and angles of camber and toe. As a rule, adjustment of all these parameters produce on special stands at service stations, but in this case it is not always the adjustment will be optimal for a specific vehicle and specific conditions.
Familiarity with this machine was held at last year’s show “autoexotic” (photo No. 11’2006) — a celebration of homemade and vintage of motor equipment, which has now become traditional and held annually in Moscow at the Tushino airfield. Represented the car Alex starilov her new owner. He tells her readers of our magazine.
Just so you can say about worn parts restored by the method developed at the Chelyabinsk Institute of mechanization and electrification of agriculture.
After the First world war, France had the largest tank Park in the world. And the main part of it were the fighting vehicles Renault FT17— without a doubt the best tanks of the last war, which allowed them not to hurry with the creation and adoption of new models of armored vehicles. However, in 1926, he developed the first post-war concept of development of armored forces. The armament of the infantry was supposed to have three types of tanks: light, medium (or “combat”—weighing up to 20 tonnes) and heavy.
Unfortunately, in Russia, still little known very interesting and popular abroad, the subclass of radio-controlled gliders, the name of which in translation from most foreign languages sound like “throwing the glider”.
In the design of devices and equipment before the radio often question about their design: sometimes they place boards and panels of their devices in boxes that slides, fishing gear and other containers. Ham D. Plewinski offers as buildings to use more modern products — cases videokasset: they have a low cost; plastic from which they are made, can be easily processed.
To the two parts worked as a whole — they should be connected to. Where possible, use bonding, soldering or welding, but all these options are permanent fixtures. And here is the bolt to nut connection is universal: he is subject to any material, and if necessary disconnect them tight elements of the design — this fixture is easy to Unscrew. However, such a connection provides the necessary resistance only when the bonded parts are inactive; and in the event of impact, for example, vibration can fail because of such insidious phenomena as samothracian.