1. For the manufacture of a seat will need the following materials: concrete slab with dimensions 600×600 mm, 20 kg of dry cement-sand mixture for mortar, the bricks 26. Need and tools: trowel, level, kuvaldoy chisel, container for mortar.
All good loggia! The only drawback — it is vulnerable to a slanting rain or snow. Some glazed it, turning it this way in the apartment, but this measure can not be recommended — the glassing of recessed balconies prohibited, because additional window cover holds fluorescent light and also gives the facade a slovenly appearance.
Not every housewife when cleaning vegetables fruits prefers simple knife manual vegetable peeler. Apparently, because this simple and affordable kitchen tool has one drawback its cutting edge is bent relative to the base almost at right angle, so it requires some skill. Offer a small improvement peelers. Fold the blade parallel to the base, as Read more…
To various tool holders, cartridges and heads, clamping a working tool in addition to reliability, is increasingly imposed and such requirements as simplicity, convenience and fast-shift. It is these qualities in the first place and is distinguished by a new Chuck for horizontal boring machines created by young innovators Odessa plant of milling machines named after S. M. Kirov.
Oscillating turret French light tank AMX-13 was only one of the features of this machine. Another feature is a violation of the creators of the familiar classic layout, when the power plant took a normal time for the location of offices in the front of the case, the working place of the driver with the control organs of the tank shifted to the left side, moreover, the fighting compartment was placed in the aft.
Homebrew joke about the fact that the screw hammered by a hammer holds better than a nail wrapped with a screwdriver, I remembered in that moment, when it took a fairly long screw M6, which Arsenal was not. This joke led to the idea to make a screw with a countersunk head of a suitable Read more…
Beginning homebrew is often the inexperience or negligence cause a wound to themselves, especially on the fingers. Not enough to have in the workshop first aid kit, should still be able to bandage, and the bandage at the end to tie that without help not easy to do. Not to make “whiskers” on the end Read more…
Easy to master work of a hand drill. Sometimes does not calculate SIPU and broke in half, still quite new drill. Of course, if broke off, not the whole working part, it can still be reground. But in any case, the cutting chip usually discarded. However, a simple tubular handle with a blind axial hole Read more…
(Four steps to excellence). 1. Noise reduction (background with a frequency of 50 Hz). In parallel, each diode in the rectifier of the AC power supply (PS) located in the body of one of the speakers, connect a non-polar capacitor type КМ6 (or similar) with a capacity of 0.01 microfarads. In addition, the parallel output SP to filter the background set compact electrolytic capacitor HITANO company with a capacity of 3300 UF at a working voltage of 25 V is ineffective capacitor 1000 UF. These simple improvements reduce background noise with a frequency of 50 Hz present in the cheap versions of the speakers made in China.
the heavier the car or the unit, the more powerful Jack is required for lifting during the repair in the workshop or in the field. But the more powerful the lift, so it is heavier, and this means that it will require more effort — those who it is intended… to save.