Adjusting the temperature of the local heating using the original heating element. The idea of local heating of a small area is implemented with the help of available details that it will probably in the reserves prudent owner, including, of course, owned and hams. Moreover, as the heating element applied to ordinary fixed resistor with a power dissipation of 2 watts. Depending on the power and resistance of the constant resistor can be achieved heating limited site to a temperature of -40 °C or even 60 °C.WARM “TABLE”
Adjusting the temperature of the local heating using the original heating element. The idea of local heating of a small area is implemented with the help of available details that it will probably in the reserves prudent owner, including, of course, owned and hams. Moreover, as the heating element applied to ordinary fixed resistor with a power dissipation of 2 watts. Depending on the power and resistance of the constant resistor can be achieved heating limited site to a temperature of -40 °C or even 60 °C.
Design domestic car GAZ-21 “Volga” is haunted by the many fans of this car. Some create precise scale models-copies of this iconic sedan. Others meticulously and carefully recreate the published in the edition of luxury vintage cars, which today look better than the ones that came off the Assembly line 50 years ago. Well, while others using a fundamental design decision, so happily found in the design of GAZ-21, creating the “explanation” of this car an exclusive design.
In recent years, rakotomalala all levels are fond of a simple “building” material for flying model — plain paper. The journal “Modelist-designer” told you about the paper models on their pages. And if earlier to make the model only of paper required regulations, today this material is widely used “voluntarily”. The proof starts at the all-Russia competitions on the Cup of S. P. Korolev. About 40% of the participants in the classes SA and Ѕ6А used the paper model. Our story about the rocket champion in the class of parachute models (SA) Denis Gaganov (Sergiev Posad).
From circular knives, no matter where they worked in agricultural units, in the fields or in industrial plants, — wear out really fast sharp working edge. Therefore, innovators tend to find the most effective method of restoring the load of the tool.
Have trace modeling particularly attractive trait: despite the relative simplicity of the models, they give space for the creative work of the children’s thoughts, development of design imagination. An illustration of this situation can serve as our mug on the car model “Stratos” (Fig. 1). Recently Moscow plant “Young technician” started to produce the engine of DP-15. He has two obvious advantages: its capacity is sufficient to move the model, and it is quite affordable. Another plus: when calculating gear, you can focus on the spur gear for electric shavers that are sold as a spare . parts. Cons — size and weight — when novice modelers can not be ignored.
The car VAZ-1111 “Oka” was put into production in 1988 — assembling the machine was carried out at the Kama and the Volga factories. Further production of the car and joined the Serpukhov car factory, which produced the first machine with manual control. “Oka” is a front wheel drive car midget class (its length is 3.2 m), fitted with a 29-horsepower two-cylinder engine working volume 0,649 L.
Life has convincingly proved advantage of education, is closely associated with the labor education and professional orientation. Knowledge and work are inseparable, the Only way children and youth develop the necessary moral qualities, active life position…
