No any Amateur to shoot a video that would not be faced with the fact that he’s in the frame low light. Most often this happens when shooting in twilight and at night, and indoors when light from the bulb. Of course, the solution to this problem already very long been invented, but in most cases the cost of the solution makes it unavailable.
HIGH-SPEED SCREWDRIVER
Innovators of the Moscow machine-tool plant named after Sergo Ordzhonikidze developed an unusual screwdriver, equipped with a booster with transmission ratio 1 : 6. This means that one turn of the handle of the screwdriver results in six turns of the tightening screw. Such a screwdriver can be successfully used in small-scale and serial manufacture installation and other operations on mechanical parts, fitting and mounting work with mounting screws when fixing various caps, visors.
THE HOOK OF THE NEEDLE
To restore the native line in the repair of belts, straps, bags, small hook. But knitting is too big, and thin enough to make yourself uneasy. I propose to use an awl with a tiny hook of the needle of the sewing machine. Abrasive stone or diamond needle files, run the propyl side to lug, Read more…
WITH A KNIFE AS A LEVER
The longest of the kitchen knives the mistress used primarily for cutting large vegetables, meat fish, that is, for the most time-consuming operations for the preparation of food. To make this work less utilitiles will help a simple device to a cutting Board. Drill the tip of a knife a small hole, and one of Read more…
SWIM IN “COT”
There are many simple homemade designs boat, but mine is probably among the most simple. To make it was not difficult: me and my friend Sasha Silantyev took this for two days. And the work was as follows. First of all, with the usual clamshell removed the tarp and springs, and also, cut the rivets, the arc of the headrest. For the longitudinal framing members used a tube from another old clamshell. To blend with a transverse pipe of the framework we came up with, we think, quite an interesting way. After cutting at the end of each longitudinal pipe is made semi-circular notch. At the point of joining on the transverse elements wound through three or four layers of textile adhesive tape and placing the longitudinal pipe, pulled the frame to a steel cable.CUTTER “PUSHPULL”
Remember PushPull fabulous animal which could jump not only forward but also backward, because instead of a tail he had a second head? About it can not help reminiscent of the original bilateral cutter, manufactured by the innovators of the Gorky machine-tool production Association. Tool on a conventional tool holder has two cutting inserts mounted on carbide lining and is mounted to the top clamps. Under the clamps located struzhkolomy.
“LYNX” FOR THE BUNDESWEHR
During the Second world war, Germany was the leader in the development of heavy armored vehicles with wheel formula 8×8. After a good armored car Sd.Kfz.231(8 Rad), which was a frame structure, followed by Sd.Kfz. 234/1 with a monocoque body (see “armor collection” № 1, 2007). For these machines and their modifications was characterized by the presence of all eight of the steered wheels and two control stations. Four-axle, or, as they are often called, vosmiklasnica armored vehicles have been successfully used by Hitler’s Wehrmacht in all theaters of war until the last days of the Second world war.
WEDGE INSTEAD OF GLUE
There is no need to secure the dowel in the hole in the wall, screwed it in the screw firmly rasclient it there. Is it possible to use this principle in the connection of wooden parts using wooden studs? It turns out that you can. For this spike it is necessary to saw through the Read more…
SANDPAPER — LIKE NAIL FILE
If the amount of grinding work to be done is large, it is advisable to make a simple tool holder under the sandpaper: work will become much easier and more comfortable. The wooden bar are two oblique transverse cut, in which are inserted the ends of the skins. And in order that they don’t pop Read more…
UNIVERSAL STRAP
Rationalization proposal Lyubertsy student of secondary school № 42 of Konstantin Shishkin. If you need to turn on a lathe a few identical parts rather complicated configuration, it makes sense to use a universal strap-holder which can be mounted a set of cutters. It is made very simply is a steel bar with a groove Read more…
